Red Lion P1610010 P-CNTLDC01R is an industrial control module designed for automation applications. This unit provides reliable control functionality in a compact form factor. Suitable for use in panel building and process control environments.

Description

The P1610010 accepts either a 0 to 10 VDC or 0/4 to 20 mA DC input signal. The controller can provide an accurate output control signal (time proportional) to maintain a process at a setpoint value. Dual 4-digit displays allow viewing of the process and setpoint simultaneously. Front panel indicators inform the operator of the controller and output status. The comprehensive programming allows these controllers to meet a wide variety of application requirements.

The controller operates in the PID Control Mode for both heating and cooling, with on-demand auto-tune, that establishes the tuning constants. The PID tuning constants may be fine-tuned through the front panel and then locked out from further modification. The controller employs a unique overshoot suppression feature, that allows the quickest response without excessive overshoot. Switching to Manual Mode provides the operator direct control of the output. The controller may also be programmed to operate in On/Off mode with adjustable hysteresis.

The controller is constructed of a lightweight, high impact, black plastic textured case and bezel with a clear display window. The front panel meets NEMA 4X/IP65 specifications when properly installed. In applications that do not require protection to NEMA 4X, multiple controllers can be stacked horizontally or vertically. Modern surface-mount technology, extensive testing, plus high immunity to noise interference makes the controller extremely reliable in industrial environments.

Specifications

• PID Control with Reduced Overshoot
• Accepts 0-10V and 0/4-20mA Signals
• 18 to 36 VDC or 24 VAC Input Power
• On Demand Auto-Tuning of PID Settings
• PC or Front Panel Programming
• Relay Output

Accessories