Dixon A100C48A ADS Outalarm® with Capacitance Probe is a hose fitting designed for dry disconnect applications. It features a 48" length and integrates a capacitance probe for reliable level sensing. This fitting is built for industrial fluid handling systems requiring safe, spill-free connections.

Applications

Specifically designed for liquid terminal operation on batch loading and overfill protection, unloading, tank cars, tank trucks, marine barges, suitable for open and close dome

Construction

Features

• Totally self-contained; no wires, tubing or external power
• Rugged weather and corrosion resistant construction
• No moving parts, tip sensitive phase shift digital capacitance sensor for conductive and nonconductive fluid, conductivity sensor with integral splash shield
• Requires no calibration or adjustment
• Adjustable insertion length through a standard 1/2" NPT fitting
• High intensity audible and flashing visual outputs
• Optional opto-isolated solid state contact output
• Full, hard graduated laser engraved rod
• A100 operates up to 2500 hours n a single 9V alkaline battery
• Fail safe continuous battery monitor goes to alarm state on low battery
• Battery current drain <0.23 ma during standby; <50 ma in alarm state

Specifications

• Intrinsically safe design per ANSI/UL913 Class I, Div I Groups A, B, C and D Hazardous Areas
• Minimum dielectric constant 1.7
• Temperature range: capacitance probe: -14°F to 250°F (-26°C to 121°C)
• Activation point 1/4" above liquid surface
• Compatible with any liquid or dry bulk material with a dielectric constant of 1.7 or greater
• Horn intensity 101 dB at 2'
• Light output 3 each 3000 mcd high intensity flashing LED's
• Pressure rating on standard unit: 50 PSI, consult Dixon for applications up to 300 PSI