Remke 103A0030AHT Mini-Link Plug Assembly Hi-Temp Silicone Female 3 Pole 3ft 16 AWG

In the Tuff Link family of molded connectors & cordsets, customization means you can mix and match from our extensive selection of special materials, special hardware, special wiring, custom packaging, kitting and private labeling to develop the Molded Connector or Cordset that meets your specific needs.

Special Materials

For coupling nuts & receptacle bodies you can choose from these five types of special materials:

• Anodized Aluminum - for most industrial applications
• Stainless Steel - durability in severely corrosive environments
• Non-Metallic - best suited for damp locations
• Nickel-Plated Brass - corrosion resistant & conforms to EMC requirements
• Peek Polymers - ideal for applications with high temperatures or high pressure water.

Special Materials

For overmolding and cable include the following:

• Rubber for use in applications with extremes of temperatures, hot substrates like weld spatter, or where solvents, oil and coolants exist
• Silicone that is best used in high temperatures
• PVC which is best for general assembly applications
• PUR for excellent abrasion resistance for high abuse areas
• TPE that offers excellent chemical and abrasion resistance

Special Hardware

You can choose from a variety of custom shells, couplers or adapters.

• Remke offers five types of custom shells; flange mount, panel mount, back panel mount, P.C. type and SAE or metric threading.
• For couplers you can select either internally threaded, externally threaded or the 'housing protective' type where the coupler is threaded but covers the entire sensor for protection.

Custom Cable Assemblies

Special Wiring

For custom products or specials, Remke offers several types of special wiring including: combination wiring where one side is parallel and the other is wired in series; interlocking circuit wiring; parallel wiring; series wiring; and wiring that is specified by a customer.

Custom Packaging, Kitting, and Private Labeling

• PVC(plastic) for general industrial applications
• Rubber for use in applications where flexibility & resistance to abusive environments thru a broad temperature range is important
• Silicone for applications with extreme temperature changes or flexibility & severe environments where absolute reliability is required

• NEMA 6P & IP 68 protection
• Nickel coated then gold-plated contacts for enhanced corrosion resistance & conductivity
• Pins & contacts crimped onto wires assuring secure terminations
• Precision machined contacts for highly accurate tolerances
• Connectors that meet or exceed UL, CSA, NEMA, SAE, IEC and automotive specifications
• Heavy-duty SOOW, SJOOW or STOW cable options
• Integral strain relief and plated coupling nuts

Attachable Mini-Link Connectors provide essential flexibility for wiring in the field. In applications where it is difficult to design or plan wiring due to changing conditions, using Mini-Link cables with attachable molded connectors that can be wired on site is the answer.

TYPICAL APPLICATIONS USING MINI-LINK CONNECTORS

• Sensors on Conveyors
• Automated Assembly Equipment
• Packaging Equipment
• Robotics Equipment
• Bus Systems
• Transportation Equipment

PRODUCTS WHICH TYPICALLY USE MINI-LINK CONNECTORS

• 12 and 18mm Proximity Sensors
• Limit Switches
• Photoelectric Switches
• Solenoids & Hydraulic Valves
• Foot Operated Switches
• Power Tools
• Cranes, Hoists and their Controls