We never sell your data to third parties
Dodge 2VP68X1-5/8 variable pitch companion sheave with plain bore, 2 grooves for 5V or 8V narrow wedge V-belts, 1-5/8" bore. Designed for adjustable speed drives in HVAC, industrial, and light power transmission applications.
MODEL 2VP68X1-5/8
Contact supplier for technical support on: +1-864-284-5700
$231.33 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Adjustable pitch VP series
Features
- Dodge 1VP and 2VP series are finished bore variable speed sheaves made of cast iron and designed for heavier duty service up to 25 Hp
- Available in single and double grooves, offering a pitch range from 1.9” x to 6.7” (A belt) and 2.4” to 7.0” (B belt)
- Type 2 model has positive locked-on settings
Pulley adjustment
Modify the sheave pitch diameter by rotating the adjustable flange on the threaded hub of the pulley. Once the required diameter is obtained, tighten the adjusting screw(s) on one of the two flat surfaces. To obtain the same pitch diameter in both grooves of the VP series, tighten both movable flanges against the central flange, make trace marks on both flanges, then rotate both flanges the same number of turns.
Adjustable pitch sheaves
Adjustable speed sheaves are used primarily in the air handling industry. Optimal fan working speed is easily obtained by simply adjusting one of the pulleys.
- Adjustable pitch sheaves are made of durable gray cast iron class 30.
- Line covers from fractional light duty (less than 1 Hp) to heavy duty (40 Hp) applications
Note: DO NOT use these gray cast iron sheaves with rim speeds in excess of 6500 feet per minute. Note that the maximum RPM indicated on the arm of the sheave is based on the 6500 ft./min. limit, and doesn’t take into consideration the need for dynamic balancing (two planes). Please verify the validity of dynamic balancing in your application. All operational PT products when used in a drive are potentially dangerous and must be guarded by the user as required by applicable laws, regulations, standards and good safety practice. (Refer to ANSI standard B15.1)
Irregardless of the equipment used, Dodge Industrial recommends NOT reboring adjustable pitch pulleys. The concentricity may be lost.
| Brand | MROSupply Fasteners |
| Model | FSTPCK-592545 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-581848 |
| Brand | Cleveland |
| Model | C23824 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/