We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Grove Gear EL-HM826-25-H_-180-16 25:1 Ratio, 1.125" Input Diameter, 1" Output Diameter, Right Angle Aluminum Single-Reduction Worm Reducer 25:1 Ratio, 1.125" Input Diameter, 1" Output Diameter, Right Angle Aluminum Single-Reduction Worm Reducer
MODEL EL8260542.16
Contact supplier for technical support on: 800-626-2120
$2,282.62 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
HM-H1
Bore Code
16
Center Distance
2.6 In.
Center distance (in)
2.63
Center Distance Range
1" thru 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
Housing material
Aluminum
HP Range
2HP (< 3)
Input Bore (C Face)
1.125
Input Diameter (in)
1.125
Input Flange
180TC
Input HP
2.487
Input Keyway (C Face)
1/4 x 1/8
Input RPM
1750
Input Style
3-Piece Coupled
Model Code
HM826
Motor Frame Size
180TC
Mounting Style
Shaft Mount
No. of Gear Reductions
Single
Output
Hollow
Output Diameter (in)
1.000
Output Hollow Shaft Diameter (in)
1.000
Output HP
2.076
Output Key
1/4 X 2.50
Output RPM
70
Output Shaft Assembly Code
H1
Output Shaft Orientation
H1
Output Style
H1
Output Torque
1869
Output Torque Range
1000 to 2500 in lbs
Output type
Hollow bore
Paint/Coating
Aluminum
Product Line
EL Series - Aluminum Worm Gear Reducers
Product Type
Right Angle
Ratio
25 to 1
Ratio Range
25-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
EL Series - Aluminum Worm Gear Reducers
Series Style
EL-HM-H1
Service Factor
1
Shaft Seal Material
Viton
Size
180TC
Regal Beloit Grove Gear&Reg; EL8260542.16
UPC: 662959025550 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear ELECTRA GEAR Worm Gear Reducer, Right Angle Single Reduction, Series: EL Series, 25:1 Gear Ratio, 2.487 hp Input, 2.076 hp Output, C-Face Coupled Input, Hollow Bore Output, 1-1/8 in Dia Input, 1 in Dia Output, 70 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 1869 in-lb Output, 2.63 in Centre Distance, 1/4 x 1/8 in Input, 1/4 x 2-1/2 in Output Keyway, PAG Synthetic Oil Lubrication, Shaft Mount, Aluminum
Features:
- Aluminum housing provides superior resistances to corrosion even in harsh environments
- Factory filled with premium Mobil Glygoyle 460 PAG lubricant - USDA class H1 approved
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- The unique quill seal guard protects the input seal from damage during motor installation
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
Specs:
| Input Maximum Speed | 1750 rpm |
|---|---|
| Output Maximum Speed | 70 rpm |
| Centre Distance | 2.63 in |
| Input Type | C-Face Coupled |
| Output Size | 1 in Dia |
| Input Size | 1-1/8 in Dia |
| Lubrication Type | PAG Synthetic Oil |
| Torque Rating | 1869 in-lb Output |
| Horsepower | 2.487 hp Input, 2.076 hp Output |
| Keyway Size | 1/4 x 1/8 in Input, 1/4 x 2-1/2 in Output |
| Gear Ratio | 25:1 |
| Output Type | Hollow Bore |
| Mounting Type | Shaft |
| Material | Aluminum |
| Type | Right Angle Single Reduction |
| Series | EL Series |
Packaging:
Limited
SKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read moreSKU: 1318238
Right on
Took a bit to ship but after it shipped I got it fast. Right product.
Read moreSKU: 2919143
Grove gear
ordered it got a week early was exact to the specs performed flawlessly
Read more
| Brand | Consolidated Bearings |
| Model | RNAO-5 X 10 X 8 |
| Brand | Reelcraft |
| Model | 6-260043 |
| Brand | NTN Bearing |
| Model | CM-FSPAW2217N1 |
| Brand | Ringspann |
| Model | 4884.050.100.025h33 |
| Brand | CoxReels |
| Model | 1185-3328-BYXX-C |
| Brand | Consolidated Bearings |
| Model | 1-1/8X1-3/16X1-3/4 |
SKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read moreSKU: 1318238
Right on
Took a bit to ship but after it shipped I got it fast. Right product.
Read moreSKU: 2919143
Grove gear
ordered it got a week early was exact to the specs performed flawlessly
Read more