We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Grove Gear IronMan GR-BMQ813-20-L-56 (catalog GR8130077.00) is a 20:1 ratio single-reduction worm gear speed reducer with 1.33" center distance. It features a 56C quill input, 0.625" solid output shaft left hand, and a cast iron housing. This right-angle reducer is part of the IronMan 800 Series.
MODEL GR8130077.00
Contact supplier for technical support on: 800-626-2120
$582.62 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Assembly
BMQ-L
Center Distance
1.3 In.
Center distance (in)
1.33
Center Distance Range
1" thru 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
H-Tap Size
5/16-18 UNC
Height (in)
10.50
Housing material
Cast iron
HP Range
1/2 to 3/4 HP (< 1)
Input Bore (C Face)
0.625
Input Diameter (in)
0.625
Input Flange
56C
Input HP
0.551
Input HP @ 1750 RPM
0.551
Input RPM
1750
Input Style
Quill
Keyway
3/16 X 3/32
Length (in)
10.69
Max OHL (Output Shaft)
700
Max Thrust Load (Output Shaft)
1144
Model Code
BMQ813
Motor Frame Size
56C
Mounting Style
Base
No. of Gear Reductions
Single
Output
Left
Output Diameter (in)
0.625
Output HP
0.445
Output Key
3/16 X 1.50
Output RPM
87
Output Shaft Assembly Code
L
Output Shaft Direction
Left
Output Shaft Orientation
L
Output Style
L
Output Torque
320
Output Torque (lb-in)
320
Output Torque Range
250 to 500 in lbs
Output type
Solid Shaft
Overhung Load
700
Paint/Coating
Blue
Product Line
GR Series - Ironman Worm Gear Reducers
Product Type
Worm Speed Reducer
Ratio
20 to 1
Ratio Range
20-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
GR Series - Ironman Worm Gear Reducers
Series Code
GR
Series Style
GR-BMQ-L
Series Type
Cast Iron 800 Worm Gear Reducers
Service Factor
1
Shaft Seal Material
Viton
Size
56C
TAP Depth
0.5
Thrust Rating - output shaft
1144
Width (in)
9.06
Regal Beloit Grove Gear&Reg; GR8130077.00
UPC: | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear® IRONMAN® Worm Gear Reducer, Right Angle Single Reduction, Series: GR Series, 20:1 Gear Ratio, 0.551 hp Input, 0.445 hp Output, C-Face Quill Input, Shaft Output, 5/8 in Dia Input, 0.625 in Dia x 2.16 in L Output, 87 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 320 in-lb Output, 1.33 in Centre Distance, 3/16 x 3/32 in Input, 3/16 x 1-1/2 in Output Keyway, PAG Synthetic Oil Lubrication, Base Mount, Cast Iron
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil® Glygoyle® 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks
- Oversized steel output shaft provides superior overhung load and torque characteristics
Specs:
- Input Maximum Speed: 1750 rpm
- Output Maximum Speed: 87 rpm
- Centre Distance: 1.33 in
- Input Type: C-Face Quill
- Output Size: 0.625 in Dia x 2.16 in L
- Input Size: 5/8 in Dia
- Lubrication Type: PAG Synthetic Oil
- Torque Rating: 320 in-lb Output
- Horsepower: 0.551 hp Input, 0.445 hp Output
- Keyway Size: 3/16 x 3/32 in Input, 3/16 x 1-1/2 in Output
- Gear Ratio: 20:1
- Output Type: Shaft
- Mounting Type: Base
- Material: Cast Iron
- Type: Right Angle Single Reduction
- Series: GR Series
Packaging:
- Weight: 17.0 lb
Warranty:
Limited
#42580
Brand
Boston Gear
Model
F713-20-B5-G
#141685
Brand
Dodge
Model
13Q20L56
#152195
Brand
Dodge
Model
13QZ20L56
#141704
Brand
Dodge
Model
13Q20L56WP
#142776
Brand
Dodge
Model
13A20L56
#152332
Brand
Dodge
Model
13QZ20L56WP
#142846
Brand
Dodge
Model
13A20L56WP
#144807
Brand
Dodge
Model
13AZ20L56
| Brand | SEW Eurodrive |
| Model | S57 DRN80M4/BE1/TF |
| Brand | Techtop |
| Model | GX3-AL-TF-182TC-2-B-D-3 |
| Brand | Nord Gear |
| Model | SK4282AZ F |
| Brand | Nord Gear |
| Model | SK1SI31VF-N56C |
