We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Grove Gear IronMan GR-WBMQ818-30-R-56 (catalog GR8183019.00) is a 30:1 single-reduction worm gear speed reducer with 1.75" center distance. It features a WASHGUARD white epoxy finish, cast iron housing, 56C quill input, and right-hand solid output with 0.875" diameter shaft. Designed for washdown environments.
MODEL GR8183019.00
Contact supplier for technical support on: 800-626-2120
$1,057.68 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
WBMQ-R
Center Distance
1.8 In.
Center distance (in)
1.75
Center Distance Range
1" thru 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
H-Tap Size
5/16-18 UNC
Height (in)
10.50
Housing material
Cast iron
HP Range
1/2 to 3/4 HP (< 1)
Input Bore (C Face)
0.625
Input Diameter (in)
0.625
Input Flange
56C
Input HP
0.741
Input RPM
1750
Input Style
Quill
Keyway
3/16 X 3/32
Length (in)
10.69
Model Code
WBMQ818
Motor Frame Size
56C
Mounting Style
No Base
No. of Gear Reductions
Single
Output
Right
Output Diameter (in)
0.875
Output HP
0.569
Output Key
3/16 X 1.38
Output RPM
58
Output Shaft Assembly Code
R
Output Shaft Direction
Right
Output Shaft Orientation
R
Output Style
R
Output Torque
614
Output Torque Range
500 to 1000 in lbs
Output type
Shaft
Overhung Load
1200
Paint/Coating
White Epoxy
Product Line
GR Series - Ironman Worm Gear Reducers
Product Type
Right Angle
Ratio
30 to 1
Ratio Range
30-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
GR Series - Ironman Worm Gear Reducers
Series Code
GR
Series Style
GR-WBMQ-R
Series Type
Cast Iron 800 Worm Gear Reducers
Service Factor
1
Shaft Seal Material
Viton
Size
56C
TAP Depth
0.63
Width (in)
9.06
Regal Beloit Grove Gear&Reg; GR8183019.00
UPC: 690310009970 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear® IRONMAN® Washguard® Worm Gear Reducer, Right Angle Single Reduction, Series: GR Series, 30:1 Gear Ratio, 0.741 hp Input, 0.569 hp Output, C-Face Quill Input, Shaft Output, 5/8 in Dia Input, 0.875 in Dia x 2.05 in L Output, 58 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 614 in-lb Output, 1-3/4 in Centre Distance, 3/16 x 3/32 in Input, 0.1875 x 1.38 in Output Keyway, PAG Synthetic Oil Lubrication, No Base Mount, Cast Iron
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil® Glygoyle® 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
Specs:
- Input Maximum Speed: 1750 rpm
- Output Maximum Speed: 58 rpm
- Centre Distance: 1-3/4 in
- Input Type: C-Face Quill
- Output Size: 0.875 in Dia x 2.05 in L
- Input Size: 5/8 in Dia
- Lubrication Type: PAG Synthetic Oil
- Torque Rating: 614 in-lb Output
- Horsepower: 0.741 hp Input, 0.569 hp Output
- Keyway Size: 3/16 x 3/32 in Input, 0.1875 x 1.38 in Output
- Gear Ratio: 30:1
- Output Type: Shaft
- Mounting Type: No Base
- Material: Cast Iron
- Type: Right Angle Single Reduction
- Series: GR Series
Packaging:
- Length: 10.69 in
- Width: 9.06 in
- Height: 10.5 in
- Weight: 24.0 lb
Warranty:
Limited
| Brand | Toshiba |
| Model | 0016XDSB47A-P |
| Brand | GMN Bearings USA |
| Model | SM61911 CTA P4+ UL |
| Brand | Electra/Grove Gear |
| Model | EL8300575.19 |
| Brand | GMN Bearings USA |
| Model | S 36 X 62 X 10 |
| Brand | GMN Bearings USA |
| Model | S61801 ETA P4+ UL |