We never sell your data to third parties
Grove Gear GR-HMQ824-30-H1-56-20 (catalog GR8240555.20) 30:1 single-reduction right angle worm gear speed reducer with 2.38" center distance, 56C quill flange input, universal hollow output with 1-1/4" bore, and cast iron housing. Factory-filled with synthetic oil and 100% run-leak tested. IronMan series.
MODEL GR8240555.20
Contact supplier for technical support on: 800-626-2120
$1,204.28 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Assembly
HMQ-H1
Bore Code
20
Center Distance
2.4 In.
Center distance (in)
2.38
Center Distance Range
1" thru 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
Height (in)
10.50
Housing material
Cast iron
HP Range
1 HP to (< 2)HP
Input Bore (C Face)
0.625
Input Diameter (in)
0.625
Input Flange
56C
Input HP
0.27
Input HP @ 1750 RPM
1.653
Input RPM
100
Input Style
Quill
Keyway
3/16 X 3/32
Length (in)
10.69
Max OHL (Output Shaft)
1770
Max Thrust Load (Output Shaft)
2091
Model Code
HMQ824
Motor Frame Size
56
Motor HP Rating
1.5
Mounting Style
Shaft Mount
No. of Gear Reductions
Single
Output
Hollow
Output Diameter (in)
1.25
Output Hollow Shaft Diameter (in)
1.250
Output HP
1.317
Output Key
1/4 X 2.50
Output RPM
58.3
Output Shaft Assembly Code
H1
Output Shaft Direction
H1
Output Shaft Orientation
H1
Output Style
H1
Output Torque
1423
Output Torque (lb-in)
2197
Output Torque Range
1000 to 2500 in lbs
Output type
Hollow bore
Overhung Load Rating (Output Shaft(lb))
1770
Paint/Coating
Blue
Product Line
GR Series - Ironman Worm Gear Reducers
Product Type
Right Angle
Ratio
30 to 1
Ratio Range
30-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
GR Series - Ironman Worm Gear Reducers
Series Code
GR
Series Style
GR-HMQ-H1
Series Type
Cast Iron 800 Worm Gear Reducers
Service Factor
1
Shaft Seal Material
Viton
Size
56C
Thrust Rating - output shaft
2091
Width (in)
9.06
Regal Beloit Grove Gear&Reg; GR8240555.20
UPC: | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear IRONMAN Worm Gear Reducer, Right Angle Single Reduction, Series: GR Series, 30:1 Gear Ratio, 1.653 hp Input, 1.317 hp Output, 1.5 hp Motor, C-Face Quill Input, Hollow Bore Output, 5/8 in Dia Input, 1-1/4 in Dia Output, 58.3 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 1423 in-lb Output, 2.38 in Centre Distance, 3/16 x 3/32 in Input, 1/4 x 2-1/2 in Output Keyway, PAG Synthetic Oil Lubrication, Shaft Mount, Cast Iron, 6 in W
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil Glygoyle 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
Specs:
| Input Maximum Speed | 1750 rpm |
|---|---|
| Output Maximum Speed | 58.3 rpm |
| Centre Distance | 2.38 in |
| Input Type | C-Face Quill |
| Output Size | 1-1/4 in Dia |
| Input Size | 5/8 in Dia |
| Lubrication Type | PAG Synthetic Oil |
| Torque Rating | 1423 in-lb Output |
| Horsepower | 1.653 hp Input, 1.317 hp Output, 1.5 hp Motor |
| Keyway Size | 3/16 x 3/32 in Input, 1/4 x 2-1/2 in Output |
| Gear Ratio | 30:1 |
| Output Type | Hollow Bore |
| Mounting Type | Shaft |
| Dimensions | 6 in W |
| Material | Cast Iron |
| Type | Right Angle Single Reduction |
| Series | GR Series |
Packaging:
Limited
#2296382
Brand
Morse
Model
466207
#2225812
Brand
HubCity
Model
0230-07176
#136480
Brand
Dodge
Model
455241
#345066
Brand
TB Woods
Model
5V4652
#2225811
Brand
HubCity
Model
0230-07175
#5122354
Brand
HubCity
Model
0230-07171
#2225846
Brand
HubCity
Model
0230-07210
#1770505
Brand
HubCity
Model
0270-06622
| Brand | NK North America Inc. |
| Model | K2125.1501105X50 |
| Brand | WEG |
| Model | 00312ET3PCT213TF1-W2 |
| Brand | Contrinex Sensors |
| Model | YBES-30K4-1130-P012 |
| Brand | Contrinex Sensors |
| Model | YBB-14R4-0250-G012 |
| Brand | Electra/Grove Gear |
| Model | 10103678 |
| Brand | GMN Bearings USA |
| Model | HYSM61905 CTA P4+ UL |