We never sell your data to third parties
Grove Gear IronMan GR-HMQ824-15-H1-140-23 (catalog GR8240564.23) 15:1 single-reduction right angle worm gear speed reducer with 2.38" center distance, cast iron housing, 140TC quill flange input, and universal hand hollow output with 1-7/16" bore. Input shaft diameter is 0.875" and output diameter is 1.438". Factory-filled with PAG synthetic oil and equipped with Viton double-lip seals for reliable performance in industrial applications.
MODEL GR8240564.23
Contact supplier for technical support on: 800-626-2120
Call for Pricing - 888-671-2883
Typically Ships in: 1 day
Returnable:No
Assembly
HMQ-H1
Bore Code
23
Center Distance
2.4 In.
Center distance (in)
2.38
Center Distance Range
1" thru 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
Height (in)
10.50
Housing material
Cast iron
HP Range
2 HP to (< 3)HP
Input Bore (C Face)
0.875
Input Diameter (in)
0.875
Input Flange
143-5TC
Input HP
3.268
Input HP @ 1750 RPM
2.765
Input RPM
2500
Input Style
Quill
Keyway
3/16 X 3/32
Length (in)
10.69
Max OHL (Output Shaft)
1770
Max Thrust Load (Output Shaft)
2091
Model Code
HMQ824
Motor Frame Size
140
Motor HP Rating
2
Mounting Style
Shaft Mount
No. of Gear Reductions
Single
Nominal Motor HP Rating to HP @ 1750 RPM
2
Output
Hollow
Output Diameter (in)
1.438
Output Hollow Shaft Diameter (in)
1.438
Output HP
2.439
Output Key
3/8 X 3.00
Output RPM
116.7
Output Shaft Assembly Code
H1
Output Shaft Direction
H1
Output Shaft Orientation
H1
Output Style
H1
Output Torque
1318
Output Torque (lb-in)
1102
Output Torque Range
1000 to 2500 in lbs
Output type
Hollow bore
Overhung Load Rating (Output Shaft(lb))
1770
Paint/Coating
Blue
Product Line
GR Series - Ironman Worm Gear Reducers
Product Type
Right Angle
Ratio
15 to 1
Ratio Range
15-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
GR Series - Ironman Worm Gear Reducers
Series Code
GR
Series Style
GR-HMQ-H1
Series Type
Cast Iron 800 Worm Gear Reducers
Service Factor
1
Shaft Seal Material
Viton
Size
140TC
Thrust Rating - output shaft
2091
Width (in)
9.06
Regal Beloit Grove Gear&Reg; GR8240564.23
UPC: | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear IRONMAN Worm Gear Reducer, Right Angle Single Reduction, Series: GR Series, 15:1 Gear Ratio, 2.765 hp Input, 2.439 hp Output, 2 hp Motor, C-Face Quill Input, Hollow Bore Output, 7/8 in Dia Input, 1.438 in Dia Output, 116.7 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 1318 in-lb Output, 2.38 in Centre Distance, 3/16 x 3/32 in Input, 3/8 x 3 in Output Keyway, PAG Synthetic Oil Lubrication, Shaft Mount, Cast Iron, 6 in W
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil Glygoyle 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
Specs:
| Input Maximum Speed | 1750 rpm |
|---|---|
| Output Maximum Speed | 116.7 rpm |
| Centre Distance | 2.38 in |
| Input Type | C-Face Quill |
| Output Size | 1.438 in Dia |
| Input Size | 7/8 in Dia |
| Lubrication Type | PAG Synthetic Oil |
| Torque Rating | 1318 in-lb Output |
| Horsepower | 2.765 hp Input, 2.439 hp Output, 2 hp Motor |
| Keyway Size | 3/16 x 3/32 in Input, 3/8 x 3 in Output |
| Gear Ratio | 15:1 |
| Output Type | Hollow Bore |
| Mounting Type | Shaft |
| Dimensions | 6 in W |
| Material | Cast Iron |
| Type | Right Angle Single Reduction |
| Series | GR Series |
Packaging:
Limited
SKU: 2919143
Grove gear
ordered it got a week early was exact to the specs performed flawlessly
Read moreSKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read more
#142481
Brand
Dodge
Model
23Q15H14
#144030
Brand
Dodge
Model
23A15H14
#149535
Brand
Dodge
Model
23Q15H14WP
#144009
Brand
Dodge
Model
23A15H14WP
#6000552
Brand
Winsmith
Model
U2415HM14
| Brand | Electra/Grove Gear |
| Model | GRL8210541.20 |
| Brand | Wichita Clutch |
| Model | 30107907 |
| Brand | SEW Eurodrive |
| Model | WA20 DRS71S4 |
| Brand | Electra/Grove Gear |
| Model | GRG8210544.19 |
| Brand | Electra/Grove Gear |
| Model | GR8420611.31 |
SKU: 2919143
Grove gear
ordered it got a week early was exact to the specs performed flawlessly
Read moreSKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read more