We never sell your data to third parties
Grove Gear IronMan GR-BMQ830-50-D-140 GR8300249.00 50:1 ratio right angle cast iron single-reduction worm gear speed reducer with 3.00" center distance. Features 140TC quill flange input, 0.875" input diameter, 1.250" double extension solid output shaft. Part of the 800 Series with motorized quill input.
MODEL GR8300249.00
Not Returnable This item is made to order.
Contact supplier for technical support on: 800-626-2120
$1,826.47 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Assembly
BMQ-D
Center Distance
3 In.
Center distance (in)
3.00
Center Distance Range
1" thru 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
H-Tap Size
7/16 - 14 UNC
Housing material
Cast iron
HP Range
1 to 1-1/2 (< 2)
Input Bore (C Face)
0.875
Input Diameter (in)
0.875
Input Flange
143-5TC
Input HP
0.372
Input HP @ 1750 RPM
1.915
Input Keyway (C Face)
3/16 x 3/32
Input RPM
100
Input Style
Quill
Max OHL (Output Shaft)
2170
Max Thrust Load (Output Shaft)
2574
Model Code
BMQ830
Motor Frame Size
140TC
Mounting Style
Base
No. of Gear Reductions
Single
Output
Left & Right
Output Diameter (in)
1.250
Output HP
1.383
Output Key
1/4 X 1.75
Output RPM
35
Output Shaft Assembly Code
D
Output Shaft Direction
Double
Output Shaft Orientation
LR
Output Style
D
Output Torque
2490
Output Torque (lb-in)
4156
Output Torque Range
1000 to 2500 in lbs
Output type
Solid Shaft
Overhung Load
2170
Paint/Coating
Blue
Product Line
GR Series - Ironman Worm Gear Reducers
Product Type
Worm Speed Reducer
Ratio
50 to 1
Ratio Range
50-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
GR Series - Ironman Worm Gear Reducers
Series Code
GR
Series Style
GR-BMQ-D
Service Factor
1
Shaft Seal Material
Viton
Size
140TC
TAP Depth
0.88
Thrust Rating - output shaft
2574
Regal Beloit Grove Gear&Reg; GR8300249.00
UPC: 690310019788 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear IRONMAN Worm Gear Reducer, Right Angle Single Reduction, Series: GR Series, 50:1 Gear Ratio, 1.915 hp Input, 1.383 hp Output, C-Face Quill Input, Shaft Output, 7/8 in Dia Input, 1.25 in Dia x 3.6 in L Output, 35 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 2490 in-lb Output, 3 in Centre Distance, 3/16 x 3/32 in Input, 1/4 x 1-3/4 in Output Keyway, PAG Synthetic Oil Lubrication, Base Mount, Cast Iron
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil Glygoyle 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks
- Oversized steel output shaft provides superior overhung load and torque characteristics
Specs:
| Input Maximum Speed | 1750 rpm |
|---|---|
| Output Maximum Speed | 35 rpm |
| Centre Distance | 3 in |
| Input Type | C-Face Quill |
| Output Size | 1.25 in Dia x 3.6 in L |
| Input Size | 7/8 in Dia |
| Lubrication Type | PAG Synthetic Oil |
| Torque Rating | 2490 in-lb Output |
| Horsepower | 1.915 hp Input, 1.383 hp Output |
| Keyway Size | 3/16 x 3/32 in Input, 1/4 x 1-3/4 in Output |
| Gear Ratio | 50:1 |
| Output Type | Shaft |
| Mounting Type | Base |
| Material | Cast Iron |
| Type | Right Angle Single Reduction |
| Series | GR Series |
Packaging:
Limited
SKU: 1328004
Enginiering
got what I need it the first time. no hassle, friendly customer service, communication is excellent, I am happy with the delivery time.
Read moreSKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read moreSKU: 2919143
Grove gear
ordered it got a week early was exact to the specs performed flawlessly
Read more
| Brand | Dodge |
| Model | L075N-HOLE-SP |
SKU: 1328004
Enginiering
got what I need it the first time. no hassle, friendly customer service, communication is excellent, I am happy with the delivery time.
Read moreSKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read moreSKU: 2919143
Grove gear
ordered it got a week early was exact to the specs performed flawlessly
Read more