We never sell your data to third parties
Grove Gear GR-HMQ842-15-H1-180-32 GR8420600.32 15:1 ratio, 1.125" input diameter, 2" output diameter, right angle cast iron single-reduction worm gear speed reducer. 4.25" center distance, 180TC quill flange input, universal hand hollow output. IronMan series with one-piece CNC-machined housing.
MODEL GR8420600.32
Contact supplier for technical support on: 800-626-2120
$3,877.60 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
HMQ-H1
Bore Code
32
Center Distance
4.2 In.
Center distance (in)
4.25
Center Distance Range
Above 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
Housing material
Cast iron
HP Range
10 HP to (< 15)HP
Input Bore (C Face)
1.125
Input Diameter (in)
1.125
Input Flange
182-4TC
Input HP
1.608
Input HP @ 1750 RPM
11.13
Input RPM
100
Input Style
Quill
Keyway
1/4 X 1/8
Max OHL (Output Shaft)
3190
Max Thrust Load (Output Shaft)
2319
Model Code
HMQ842
Motor Frame Size
180
Motor HP Rating
10
Mounting Style
Shaft Mount
No. of Gear Reductions
Single
Nominal Motor HP Rating to HP @ 1750 RPM
10
Output
Hollow
Output Diameter (in)
2
Output Hollow Shaft Diameter (in)
2.000
Output HP
10.2
Output Key
1/2 X 3.38
Output RPM
116
Output Shaft Assembly Code
H1
Output Shaft Direction
H1
Output Shaft Orientation
H1
Output Style
H1
Output Torque
5508
Output Torque (lb-in)
11245
Output Torque Range
5000 to 10000 in lbs
Output type
Hollow bore
Overhung Load Rating (Output Shaft(lb))
3190
Paint/Coating
Blue
Product Line
GR Series - Ironman Worm Gear Reducers
Product Type
Right Angle
Ratio
15 to 1
Ratio Range
15-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
GR Series - Ironman Worm Gear Reducers
Series Code
GR
Series Style
GR-HMQ-H1
Series Type
Cast Iron 800 Worm Gear Reducers
Service Factor
1
Shaft Seal Material
Viton
Size
180TC
Thrust Rating - output shaft
2319
Regal Beloit Grove Gear&Reg; GR8420600.32
UPC: | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear® IRONMAN® Worm Gear Reducer, Right Angle Single Reduction, Series: GR Series, 15:1 Gear Ratio, 11.13 hp Input, 10.2 hp Output, 10 hp Motor, C-Face Quill Input, Hollow Bore Output, 1-1/8 in Dia Input, 2 in Dia Output, 116 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 5508 in-lb Output, 4-1/4 in Centre Distance, 1/4 x 1/8 in Input, 0.5 x 3.38 in Output Keyway, PAG Synthetic Oil Lubrication, Shaft Mount, Cast Iron, 8-1/2 in W
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil® Glygoyle® 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
Specs:
- Input Maximum Speed: 1750 rpm
- Output Maximum Speed: 116 rpm
- Centre Distance: 4-1/4 in
- Input Type: C-Face Quill
- Output Size: 2 in Dia
- Input Size: 1-1/8 in Dia
- Lubrication Type: PAG Synthetic Oil
- Torque Rating: 5508 in-lb Output
- Horsepower: 11.13 hp Input, 10.2 hp Output, 10 hp Motor
- Keyway Size: 1/4 x 1/8 in Input, 0.5 x 3.38 in Output
- Gear Ratio: 15:1
- Output Type: Hollow Bore
- Mounting Type: Shaft
- Dimensions: 8-1/2 in W
- Material: Cast Iron
- Type: Right Angle Single Reduction
- Series: GR Series
Packaging:
- Weight: 149.0 lb
Warranty:
Limited
SKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read moreSKU: 1318238
Right on
Took a bit to ship but after it shipped I got it fast. Right product.
Read moreSKU: 1328004
Enginiering
got what I need it the first time. no hassle, friendly customer service, communication is excellent, I am happy with the delivery time.
Read more
| Brand | Wichita Clutch |
| Model | 20000714 |
| Brand | NTN Bearing |
| Model | 6316ZZC3/EM |
SKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read moreSKU: 1318238
Right on
Took a bit to ship but after it shipped I got it fast. Right product.
Read moreSKU: 1328004
Enginiering
got what I need it the first time. no hassle, friendly customer service, communication is excellent, I am happy with the delivery time.
Read more