We never sell your data to third parties
Grove Gear GR-HMQ842-40-H1-180-24 (catalog GR8420604.24) 40:1 ratio single-reduction worm gear speed reducer with 4.25" center distance. Cast iron housing with 180TC quill flange input, 1.125" input diameter, and 1.5" hollow output bore. Universal hand hollow output. Right angle configuration.
MODEL GR8420604.24
Contact supplier for technical support on: 800-626-2120
$4,014.92 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
HMQ-H1
Bore Code
24
Center Distance
4.2 In.
Center distance (in)
4.25
Center Distance Range
Above 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
Housing material
Cast iron
HP Range
5 HP to (< 7-1/2)HP
Input Bore (C Face)
1.125
Input Diameter (in)
1.125
Input Flange
182-4TC
Input HP
5.262
Input HP @ 1750 RPM
5.262
Input RPM
1750
Input Style
Quill
Keyway
1/4 X 1/8
Max OHL (Output Shaft)
3715
Max Thrust Load (Output Shaft)
2533
Model Code
HMQ842
Motor Frame Size
180
Motor HP Rating
5
Mounting Style
Shaft Mount
No. of Gear Reductions
Single
Nominal Motor HP Rating to HP @ 1750 RPM
5
Output
Hollow
Output Diameter (in)
1.5
Output Hollow Shaft Diameter (in)
1.500
Output HP
4.274
Output Key
3/8 X 3.00
Output RPM
43
Output Shaft Assembly Code
H1
Output Shaft Direction
H1
Output Shaft Orientation
H1
Output Style
H1
Output Torque
6156
Output Torque (lb-in)
6156
Output Torque Range
5000 to 10000 in lbs
Output type
Hollow bore
Overhung Load Rating (Output Shaft(lb))
3715
Paint/Coating
Blue
Product Line
GR Series - Ironman Worm Gear Reducers
Product Type
Right Angle
Ratio
40 to 1
Ratio Range
40-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
GR Series - Ironman Worm Gear Reducers
Series Code
GR
Series Style
GR-HMQ-H1
Series Type
Cast Iron 800 Worm Gear Reducers
Service Factor
1
Shaft Seal Material
Viton
Size
180TC
Thrust Rating - output shaft
2533
Regal Beloit Grove Gear&Reg; GR8420604.24
UPC: | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear IRONMAN Worm Gear Reducer, Right Angle Single Reduction, Series: GR Series, 40:1 Gear Ratio, 5.262 hp Input, 4.274 hp Output, 5 hp Motor, C-Face Quill Input, Hollow Bore Output, 1-1/8 in Dia Input, 1-1/2 in Dia Output, 43 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 6156 in-lb Output, 4-1/4 in Centre Distance, 1/4 x 1/8 in Input, 3/8 x 3 in Output Keyway, PAG Synthetic Oil Lubrication, Shaft Mount, Cast Iron, 8-1/2 in W
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil Glygoyle 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
Specs:
| Input Maximum Speed | 1750 rpm |
|---|---|
| Output Maximum Speed | 43 rpm |
| Centre Distance | 4-1/4 in |
| Input Type | C-Face Quill |
| Output Size | 1-1/2 in Dia |
| Input Size | 1-1/8 in Dia |
| Lubrication Type | PAG Synthetic Oil |
| Torque Rating | 6156 in-lb Output |
| Horsepower | 5.262 hp Input, 4.274 hp Output, 5 hp Motor |
| Keyway Size | 1/4 x 1/8 in Input, 3/8 x 3 in Output |
| Gear Ratio | 40:1 |
| Output Type | Hollow Bore |
| Mounting Type | Shaft |
| Dimensions | 8-1/2 in W |
| Material | Cast Iron |
| Type | Right Angle Single Reduction |
| Series | GR Series |
Packaging:
Limited
#5948900
Brand
HubCity
Model
0230-47451
| Brand | Electra/Grove Gear |
| Model | GR8420595.23 |
| Brand | Electra/Grove Gear |
| Model | GR8420594.30 |
| Brand | Allen Bradley |
| Model | 1336F-BRF200-AN-EN-HCS1-L6 |
| Brand | Electra/Grove Gear |
| Model | GR8420592.26 |
| Brand | Electra/Grove Gear |
| Model | GR8240575.16 |
| Brand | Electra/Grove Gear |
| Model | GR8180628.16 |
| Brand | Climax Metal |
| Model | C405M-80X120 |
| Brand | Electra/Grove Gear |
| Model | GR8420596.31 |