We never sell your data to third parties
Grove Gear IronMan GR-HMQ852-25-H1-210-36 (catalog GR8520614.36) 25:1 ratio single-reduction worm gear speed reducer with 5.25" center distance, 210TC quill input, and universal hollow output with 2.250" bore. Cast iron housing with blue paint, Viton seals, and 11,915 lb-in output torque at 70 RPM. Input shaft diameter 1.375", service factor 1.0, shaft mount design.
MODEL GR8520614.36
Contact supplier for technical support on: 800-626-2120
$6,165.19 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
HMQ-H1
Bore Code
36
Center Distance
5.2 In.
Center distance (in)
5.25
Center Distance Range
Above 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
Housing material
Cast iron
HP Range
10 HP to (< 15)HP
Input Bore (C Face)
1.375
Input Diameter (in)
1.375
Input Flange
213-5TC
Input HP
10.298
Input HP @ 1750 RPM
12.19
Input Keyway (C Face)
5/16 X 5/32
Input RPM
1170
Input Style
Quill
Max OHL (Output Shaft)
3560
Max Thrust Load (Output Shaft)
3412
Model Code
HMQ852
Motor Frame Size
210
Mounting Style
Shaft Mount
No. of Gear Reductions
Single
Output
Hollow
Output Diameter (in)
2.25
Output Hollow Shaft Diameter (in)
2.250
Output HP
10.57
Output Key
1/2 X 3.38
Output RPM
70
Output Shaft Assembly Code
H1
Output Shaft Direction
H1
Output Shaft Orientation
H1
Output Style
H1
Output Torque
9517
Output Torque (lb-in)
11915
Output Torque Range
5000 to 10000 in lbs
Output type
Hollow bore
Overhung Load Rating (Output Shaft(lb))
3560
Paint/Coating
Blue
Product Line
GR Series - Ironman Worm Gear Reducers
Product Type
Right Angle
Ratio
25 to 1
Ratio Range
25-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
GR Series - Ironman Worm Gear Reducers
Series Code
GR
Series Style
GR-HMQ-H1
Service Factor
1
Shaft Seal Material
Viton
Size
210TC
Thrust Rating - output shaft
3412
Regal Beloit Grove Gear&Reg; GR8520614.36
UPC: 690310033364 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear IRONMAN Worm Gear Reducer, Right Angle Single Reduction, Series: GR Series, 25:1 Gear Ratio, 12.19 hp Input, 10.57 hp Output, C-Face Quill Input, Hollow Bore Output, 1-3/8 in Dia Input, 2-1/4 in Dia Output, 70 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 9517 in-lb Output, 5-1/4 in Centre Distance, 5/16 x 5/32 in Input, 1/2 x 4 in Output Keyway, PAG Synthetic Oil Lubrication, Shaft Mount, Cast Iron, 10-1/2 in W
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil Glygoyle 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
Specs:
| Input Maximum Speed | 1750 rpm |
|---|---|
| Output Maximum Speed | 70 rpm |
| Centre Distance | 5-1/4 in |
| Input Type | C-Face Quill |
| Output Size | 2-1/4 in Dia |
| Input Size | 1-3/8 in Dia |
| Lubrication Type | PAG Synthetic Oil |
| Torque Rating | 9517 in-lb Output |
| Horsepower | 12.19 hp Input, 10.57 hp Output |
| Keyway Size | 5/16 x 5/32 in Input, 1/2 x 4 in Output |
| Gear Ratio | 25:1 |
| Output Type | Hollow Bore |
| Mounting Type | Shaft |
| Dimensions | 10-1/2 in W |
| Material | Cast Iron |
| Type | Right Angle Single Reduction |
| Series | GR Series |
Packaging:
Limited
SKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read moreSKU: 1318238
Right on
Took a bit to ship but after it shipped I got it fast. Right product.
Read moreSKU: 1328004
Gear box
excellent service, fast, easy, and customer service outstanding, if any changes they call and let you know,
Read more
| Brand | SIEGMA |
| Model | KM063B-30.31-XX-HB1.1875-56C |
| Brand | Superlok |
| Model | SMCI-6-8N-TM-MK |
| Brand | INA Bearing |
| Model | HF3520 |
| Brand | Siemens Motors |
| Model | 1LE22212AA214GA3 |
| Brand | Siemens Motors |
| Model | 1LE63214FB112AA1 |
| Brand | Teco-Westinghouse |
| Model | N5-GREY |
SKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read moreSKU: 1318238
Right on
Took a bit to ship but after it shipped I got it fast. Right product.
Read moreSKU: 1328004
Gear box
excellent service, fast, easy, and customer service outstanding, if any changes they call and let you know,
Read more