We never sell your data to third parties
Grove Gear IronMan GR-HMQ860-30-H1-210-32 (catalog GR8600591.32) is a 30:1 ratio single-reduction worm gear speed reducer with 6.00" center distance. It features a cast iron housing, 210TC quill flange input, and universal hand hollow output with 2" bore. The unit is motorized with a quill input and is designed for right-angle power transmission applications.
MODEL GR8600591.32
Contact supplier for technical support on: 800-626-2120
$10,367.45 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 4 days
Returnable: See conditions
Assembly
HMQ-H1
Bore Code
32
Center Distance
6 In.
Center distance (in)
6
Center Distance Range
Above 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
Housing material
Cast iron
HP Range
10 HP to (< 15)HP
Input Bore (C Face)
1.375
Input Diameter (in)
1.375
Input Flange
213-5TC
Input HP
12.73
Input HP @ 1750 RPM
11.177
Input Keyway (C Face)
5/16 X 5/32
Input RPM
2500
Input Style
Quill
Max OHL (Output Shaft)
3723
Max Thrust Load (Output Shaft)
3990
Model Code
HMQ860
Motor Frame Size
210
Mounting Style
Shaft Mount
No. of Gear Reductions
Single
Output
Hollow
Output Diameter (in)
2
Output Hollow Shaft Diameter (in)
2.000
Output HP
9.486
Output Key
1/2 X 3.38
Output RPM
58
Output Shaft Assembly Code
H1
Output Shaft Direction
H1
Output Shaft Orientation
H1
Output Style
H1
Output Torque
10249
Output Torque (lb-in)
8222
Output Torque Range
10000 to 20000 in lbs
Output type
Hollow bore
Overhung Load Rating (Output Shaft(lb))
3723
Paint/Coating
Blue
Product Line
GR Series - Ironman Worm Gear Reducers
Product Type
Right Angle
Ratio
30 to 1
Ratio Range
30-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
GR Series - Ironman Worm Gear Reducers
Series Code
GR
Series Style
GR-HMQ-H1
Service Factor
1
Shaft Seal Material
Viton
Size
210TC
Thrust Rating - output shaft
3990
Regal Beloit Grove Gear&Reg; GR8600591.32
UPC: 690310035382 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear® IRONMAN® Worm Gear Reducer, Right Angle Single Reduction, Series: GR Series, 30:1 Gear Ratio, 11.177 hp Input, 9.486 hp Output, C-Face Quill Input, Hollow Bore Output, 1-3/8 in Dia Input, 2 in Dia Output, 58 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 10249 in-lb Output, 6 in Centre Distance, 5/16 x 5/32 in Input, 0.5 x 3.38 in Output Keyway, PAG Synthetic Oil Lubrication, Shaft Mount, Cast Iron, 11-1/2 in W
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil® Glygoyle® 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
Specs:
- Input Maximum Speed: 1750 rpm
- Output Maximum Speed: 58 rpm
- Centre Distance: 6 in
- Input Type: C-Face Quill
- Output Size: 2 in Dia
- Input Size: 1-3/8 in Dia
- Lubrication Type: PAG Synthetic Oil
- Torque Rating: 10249 in-lb Output
- Horsepower: 11.177 hp Input, 9.486 hp Output
- Keyway Size: 5/16 x 5/32 in Input, 0.5 x 3.38 in Output
- Gear Ratio: 30:1
- Output Type: Hollow Bore
- Mounting Type: Shaft
- Dimensions: 11-1/2 in W
- Material: Cast Iron
- Type: Right Angle Single Reduction
- Series: GR Series
Packaging:
- Weight: 331.0 lb
Warranty:
Limited
| Brand | INA Bearing |
| Model | HFL1826 |
| Brand | Nord Gear |
| Model | SK1SI75/40V-N56C |