We never sell your data to third parties
Grove Gear Flexaline GRG-BM832-30-R-56 (catalog GRG8320037.00) 30:1 single-reduction worm gear speed reducer with 3.25" center distance, 56C motorized flexible coupling input, 0.875" input diameter, and 1.500" right-hand solid output shaft. Cast iron housing with blue paint finish, Viton shaft seals, and base mounting. Delivers 3226 lb-in output torque at 58 RPM with 3.619 input HP at 1750 RPM.
MODEL GRG8320037.00
Contact supplier for technical support on: 800-626-2120
$2,047.10 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
BM-R
Center Distance
3.2 In.
Center distance (in)
3.25
Center Distance Range
1" thru 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
H-Tap Size
7/16 - 14 UNC
Housing material
Cast iron
HP Range
3HP (< 5)
Input Bore (C Face)
0.625
Input Diameter (in)
0.875
Input Flange
56C
Input HP
3.619
Input HP @ 1750 RPM
3.619
Input Keyway (C Face)
3/16 x 3/32
Input RPM
1750
Input Style
3-Piece Coupled
Keyway
3/16 X 1.63
Max OHL (Output Shaft)
2275
Max Thrust Load (Output Shaft)
2574
Model Code
BM832
Motor Frame Size
56C
Mounting Style
Base
No. of Gear Reductions
Single
Output
Right
Output Diameter (in)
1.500
Output HP
2.986
Output Key
3/8 X 2.63
Output RPM
58
Output Shaft Assembly Code
R
Output Shaft Direction
Right
Output Shaft Orientation
R
Output Style
R
Output Torque
3226
Output Torque Range
2500 to 5000 in lbs
Output type
Solid Shaft
Overhung Load
2275
Paint/Coating
Blue
Product Line
GRG Series - Ironman Worm Gear Reducers
Product Type
Worm Speed Reducer
Ratio
30 to 1
Ratio Range
30-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
GRG Series - Ironman Worm Gear Reducers
Series Code
GRG
Series Style
GRG-BM-R
Service Factor
1
Shaft Seal Material
Viton
Size
56C
TAP Depth
0.88
Thrust Rating - output shaft
2574
Regal Beloit Grove Gear&Reg; GRG8320037.00
UPC: 690310043936 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear® IRONMAN® Worm Gear Reducer, Right Angle Single Reduction, Series: GRG, 30:1 Gear Ratio, 3.619 hp Input, 2.986 hp Output, C-Face Coupled Input, Shaft Output, 5/8 in Dia Input, 1.5 in Dia x 3.66 in L Output, 58 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 3226 in-lb Output, 3-1/4 in Centre Distance, 3/16 x 3/32 in Input, 0.375 x 2.63 in Output Keyway, PAG Synthetic Oil Lubrication, Base Mount, Cast Iron
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil® Glygoyle® 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks
- Oversized steel output shaft provides superior overhung load and torque characteristics
Specs:
- Input Maximum Speed: 1750 rpm
- Output Maximum Speed: 58 rpm
- Centre Distance: 3-1/4 in
- Input Type: C-Face Coupled
- Output Size: 1.5 in Dia x 3.66 in L
- Input Size: 5/8 in Dia
- Lubrication Type: PAG Synthetic Oil
- Torque Rating: 3226 in-lb Output
- Horsepower: 3.619 hp Input, 2.986 hp Output
- Keyway Size: 3/16 x 3/32 in Input, 0.375 x 2.63 in Output
- Gear Ratio: 30:1
- Output Type: Shaft
- Mounting Type: Base
- Material: Cast Iron
- Type: Right Angle Single Reduction
- Series: GRG
Packaging:
- Weight: 85.0 lb
Warranty:
Limited
SKU: 2919143
Grove gear
ordered it got a week early was exact to the specs performed flawlessly
Read moreSKU: 1318238
Right on
Took a bit to ship but after it shipped I got it fast. Right product.
Read moreSKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read more
| Brand | Koyo Bearing |
| Model | SNW-26X4 7/16 |
| Brand | Koyo Bearing |
| Model | SNW-116X2 3/4 |
| Brand | Regal Rexnord |
| Model | G-03-047-QTE |
| Brand | Koyo Bearing |
| Model | SNW-20X3 1/2 |
| Brand | FYH Bearing |
| Model | UCHA207 23S6NP |
| Brand | SEW Eurodrive |
| Model | DF16DRS71M |
SKU: 2919143
Grove gear
ordered it got a week early was exact to the specs performed flawlessly
Read moreSKU: 1318238
Right on
Took a bit to ship but after it shipped I got it fast. Right product.
Read moreSKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read more