We never sell your data to third parties
Grove Gear Flexaline GRG-BMQ832-30-R-180 GRG8320181.00 30:1 single-reduction worm gear speed reducer with 3.25" center distance. Cast iron housing, 180TC quill flange input, 1.125" input shaft diameter, and 1.5" right-hand solid output shaft. IronMan-based Flexaline series offers interchangeable mounting with legacy Flexaline units.
MODEL GRG8320181.00
Contact supplier for technical support on: 800-626-2120
$1,680.73 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
BMQ-R
Center Distance
3.2 In.
Center distance (in)
3.25
Center Distance Range
1" thru 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
H-Tap Size
7/16-14 UNC
Height (in)
15.00
Housing material
Cast iron
HP Range
3HP (< 5)
Input Bore (C Face)
1.125
Input Diameter (in)
1.125
Input Flange
180TC
Input HP
3.619
Input HP @ 1750 RPM
3.619
Input RPM
1750
Input Style
Quill
Keyway
1/4 x 1/8
Length (in)
19.38
Max OHL (Output Shaft)
2275
Max Thrust Load (Output Shaft)
2574
Model Code
BMQ832
Motor Frame Size
180
Motor HP Rating
3
Mounting Style
Base
No. of Gear Reductions
Single
Nominal Motor HP Rating to HP @ 1750 RPM
3
Output
Right
Output Diameter (in)
1.500
Output HP
2.986
Output Key
3/8 X 2.63
Output RPM
58
Output Shaft Assembly Code
R
Output Shaft Direction
Right
Output Shaft Orientation
R
Output Style
R
Output Torque
3226
Output Torque Range
2500 to 5000 in lbs
Output type
Solid Shaft
Overhung Load
2275
Paint/Coating
Blue
Product Line
GRG Series - Ironman Worm Gear Reducers
Product Type
Right Angle
Ratio
30 to 1
Ratio Range
30-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
GRG Series - Ironman Worm Gear Reducers
Series Code
GRG
Series Style
GRG-BMQ-R
Series Type
Cast Iron 800 Worm Gear Reducers
Service Factor
1
Shaft Seal Material
Viton
Size
180TC
TAP Depth
0.88
Thrust Rating - output shaft
2574
Width (in)
15.13
Regal Beloit Grove Gear&Reg; GRG8320181.00
UPC: 690310045206 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear IRONMAN Worm Gear Reducer, Right Angle Single Reduction, Series: GRG, 30:1 Gear Ratio, 3.619 hp Input, 2.986 hp Output, 3 hp Motor, C-Face Quill Input, Shaft Output, 1-1/8 in Dia Input, 1.5 in Dia x 3.66 in L Output, 58 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 3226 in-lb Output, 3-1/4 in Centre Distance, 1/4 x 1/8 in Input, 0.375 x 2.63 in Output Keyway, PAG Synthetic Oil Lubrication, Base Mount, Cast Iron
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil Glygoyle 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks
- Oversized steel output shaft provides superior overhung load and torque characteristics
Specs:
| Input Maximum Speed | 1750 rpm |
|---|---|
| Output Maximum Speed | 58 rpm |
| Centre Distance | 3-1/4 in |
| Input Type | C-Face Quill |
| Output Size | 1.5 in Dia x 3.66 in L |
| Input Size | 1-1/8 in Dia |
| Lubrication Type | PAG Synthetic Oil |
| Torque Rating | 3226 in-lb Output |
| Horsepower | 3.619 hp Input, 2.986 hp Output, 3 hp Motor |
| Keyway Size | 1/4 x 1/8 in Input, 0.375 x 2.63 in Output |
| Gear Ratio | 30:1 |
| Output Type | Shaft |
| Mounting Type | Base |
| Material | Cast Iron |
| Type | Right Angle Single Reduction |
| Series | GRG |
Packaging:
| Length | 19.38 in |
|---|---|
| Width | 15.13 in |
| Height | 15.0 in |
| 68.0 lb |
Limited
#1339561
Brand
Electra/Grove Gear
Model
GRG8210115.00
#141836
Brand
Dodge
Model
17Q30L56
#1328921
Brand
Electra/Grove Gear
Model
GR8180115.00
#42607
Brand
Boston Gear
Model
F715-20-B5-G
#141724
Brand
Dodge
Model
15Q20L56
#141883
Brand
Dodge
Model
20Q30L56
#1329911
Brand
Electra/Grove Gear
Model
GR8240152.00
#142126
Brand
Dodge
Model
26Q40L56
| Brand | Browning |
| Model | S3K 34 H32PIN KT 400KV163 |
| Brand | Balax |
| Model | 11990-00T |
| Brand | Bando |
| Model | 600-S14M-2660 |
| Brand | Chicago-Latrobe |
| Model | 70208 |
