We never sell your data to third parties
Dodge 17Q20R56WP TIGEAR-2 worm gear speed reducer, 20:1 ratio, quill input, right side solid output shaft 0.875" diameter, 56C frame, 1.7" center distance, 1.03 HP input, cast iron housing, white epoxy paint. Totally enclosed, ventless design with synthetic lubricant for maintenance-free operation in any mounting position.
MODEL 17Q20R56WP
Contact supplier for technical support on: +1-864-284-5700
$879.91 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
#152343
Brand
Dodge
Model
17AZ15LR14WP
#151658
Brand
Dodge
Model
17A05L14WP
#142656
Brand
Dodge
Model
17ZJMOUNTWP
#145364
Brand
Dodge
Model
17AZ15L56WP
Base to output center height
1.9900 in, 50.546 mm
Case size
17
Center Distance
1.7" (Case Size 17)
Center distance (in)
1.7 in, Center distance (in):1.7500 in, 44.45 mm
Center to end of shaft distance
4.3100 in, 109.474 mm
Finish
White epoxy
Horsepower rating input
1.0300 hp, 0.768 kW
Horsepower rating output
0.8400 hp, 0.626 kW
Housing material
Cast iron
Input
56C flange
Input flange
56C
Input HP
1.03
Input style
Quill
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 56C frame
Motor Flange
56C NEMA C-face motor mounting
Mounting bolt pattern length
4.1900 in, 106.426 mm
Mounting bolt pattern width
2.7500 in, 69.85 mm
Nominal ratio
20
Output
Right side solid output shaft
Output bore/shaft diameter
0.875 in
Output Configuration
Right side solid output shaft, 0.875" diameter
Output horse power
0.84
Output shaft
Right (solid B)
Output shaft center to input motor mounting face distance
4.9000 in, 124.46 mm
Output style
Right
Output Torque
602 in/lb
Overhung load
1190 lbf, 5293.384 N
Paint type
White epoxy
Paint/coating
White
Power Rating
1.03 HP input capacity
Product Type
TIGEAR-2 worm gear right angle speed reducer
Rated torque output
602 in/lb, 602.0 in/lb
Ratio
20 to 1
Reduction Ratio
20:1
Seal type
Single-lip contact
Shaft diameter output
0.8750 in, 22.225 mm
Shaft length output
1.7400 in, 44.196 mm
Suitable for washdown
No
Thermal horsepower rating
1.5800 hp, 1.178 kW
SKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#1328931
Brand
Electra/Grove Gear
Model
GR8180125.00
#1328859
Brand
Electra/Grove Gear
Model
GR8180053.00
#6101465
Brand
Boston Gear
Model
F718-20KZ-B5-J1
#5999990
Brand
Winsmith
Model
U1820SR56
| Brand | Jason Industrial |
| Model | 2410M3 |
SKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/