We never sell your data to third parties
Dodge 17Q10R56 TIGEAR-2 worm gear speed reducer with 10:1 ratio, quill input, right side solid output shaft, 56C flange, and 1.7" center distance. Cast iron housing with green paint. 0.875" output shaft diameter, 1.67 HP input, 1.48 HP output, 534 in-lb output torque, 175 rpm maximum. Class 30 grey iron construction.
MODEL 17Q10R56
Contact supplier for technical support on: +1-864-284-5700
$761.11 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Base to output center height
1.9900 in, 50.546 mm
Capacity
1.67 HP input, 534 in-lb output torque
Case size
17
Center distance (in)
1.7 in, Center distance (in):1.7500 in, 44.45 mm
Center to end of shaft distance
4.3100 in, 109.474 mm
Finish
Green
Gear Type
Worm gear, right-angle
Horsepower rating input
1.6700 hp, 1.245 kW
Horsepower rating output
1.4800 hp, 1.104 kW
Housing
Cast iron construction with 1.7" center distance
Housing material
Cast iron
Input
Quill input
Input flange
56C
Input HP
1.67
Input style
Quill
Lubrication type
PAG, standard temperature
Material
Class 30 grey iron
Max RPM
175 rpm
Motor compatibility
NEMA motor, 56C frame
Motor Mount
56C flange
Mounting bolt pattern length
4.1900 in, 106.426 mm
Mounting bolt pattern width
2.7500 in, 69.85 mm
Nominal ratio
10
Output
Right side solid output shaft, 0.875" diameter
Output bore/shaft diameter
0.875 in
Output horse power
1.48
Output shaft
Right (solid B)
Output shaft center to input motor mounting face distance
4.9000 in, 124.46 mm
Output style
Right
Overhung load
1190 lbf, 5293.384 N
Paint type
Standard
Paint/coating
Green
Rated torque output
534 in/lb, 534.0 in/lb
Ratio
10:1 reduction
Seal type
Single-lip contact
Shaft diameter output
0.8750 in, 22.225 mm
Shaft length output
1.7400 in, 44.196 mm
Suitable for washdown
No
Thermal horsepower rating
2.7600 hp, 2.058 kW
Specifications
- Catalog Number: 17Q10R56
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 10:1
- Output Style: Right Side Solid Output Shaft
- Output Shaft Diameter: 0.875"
- Input Style: Quill
- Frame: 56C
- Center Distance: 1.7"
- Case Size: 17
- Housing Material: Cast Iron
- Paint: Green
- Weight: 28.0000 lb
SKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreSKU: 2835296
E20
This is exactly what I needed. Price was way below my local business that carries couplings. Thanks.
Read moreSKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#152205
Brand
Dodge
Model
17QZ05LR56
#153615
Brand
Dodge
Model
17BASE
#141846
Brand
Dodge
Model
17Q40L56
#141834
Brand
Dodge
Model
17Q20R56
#148905
Brand
Dodge
Model
17Q20H56
#2515009
Brand
Boston Gear
Model
F718-10KZT-B5-J1
#1328929
Brand
Electra/Grove Gear
Model
GR8180123.00
#5999948
Brand
Winsmith
Model
U1810SR56
| Brand | IKO Bearing |
| Model | CRBH208AUUT1 |
SKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreSKU: 2835296
E20
This is exactly what I needed. Price was way below my local business that carries couplings. Thanks.
Read moreSKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/