We never sell your data to third parties
Dodge 23Q60LR56WP TIGEAR-2 worm gear speed reducer with 60:1 ratio, quill input, double solid output shafts, 56C flange, and 2.3" center distance. Cast iron housing with white epoxy finish. 1.25" output shaft diameter. Delivers 0.8 HP input rating.
MODEL 23Q60LR56WP
Contact supplier for technical support on: +1-864-284-5700
$1,323.73 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
#144477
Brand
Dodge
Model
23AZ10R18WP
#152087
Brand
Dodge
Model
23AZ10R14WP
#5009225
Brand
Dodge
Model
23Q12L14WP
#5009315
Brand
Dodge
Model
23QZ12L56WP
Base to output center height
2.5000 in, 63.5 mm
Case size
23
Center Distance
2.3 inches
Center distance (in)
2.3 in, Center distance (in):2.3100 in, 58.674 mm
Center to end of shaft distance
5.1400 in, 130.556 mm
Finish
White epoxy
Gear Ratio
60:1 reduction
Horsepower rating input
0.8000 hp, 0.597 kW
Horsepower rating output
0.5100 hp, 0.38 kW
Housing material
Cast iron
Housing Material
Cast iron
HP Rating
0.8 HP input capacity
Input
56C flange
Input flange
56C
Input HP
0.8
Input style
Quill
Input Style
Quill input
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 56C frame
Motor Frame
56C flange mounting
Mounting bolt pattern length
5.0000 in, 127.0 mm
Mounting bolt pattern width
2.8800 in, 73.152 mm
Nominal ratio
60
Output
Double solid output shaft
Output bore/shaft diameter
1.25 in
Output horse power
0.51
Output shaft center to input motor mounting face distance
5.4600 in, 138.684 mm
Output Shaft Diameter
1.1250 inches
Output style
Left, right
Overhung load
1610 lbf, 7161.637 N
Paint Finish
White paint
Paint type
White epoxy
Paint/coating
White
Product Type
TIGEAR-2 worm gear speed reducer
Rated torque output
1111 in/lb, 1111.0 in/lb
Ratio
60 to 1
Seal type
Single-lip contact
Shaft diameter output
1.1250 in, 28.575 mm
Shaft length output
2.1800 in, 55.372 mm
Suitable for washdown
No
Thermal horsepower rating
1.2400 hp, 0.925 kW
Torque Rating
1111 in-lb output torque
Specifications
- Catalog Number: 23Q60LR56WP
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 60:1
- Output Style: Double Solid Output Shaft
- Output Shaft Diameter: 1.25"
- Input Style: Quill
- Frame: 56C
- Center Distance: 2.3"
- Case Size: 23
- Housing Material: Cast Iron
- Paint: White
- Weight: 48.0000 lb
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreHow should I store a Dodge gearbox over the off-season? This product
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails? This product
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands? This product
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#1329937
Brand
Electra/Grove Gear
Model
GR8240178.00
#6000778
Brand
Winsmith
Model
U2460SB56
#1308638
Brand
WEG
Model
PESWS-9V18AX-RM28
#5900911
Brand
WEG
Model
ESW-B18D39A-R32
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/