We never sell your data to third parties
Dodge 23Q50H56 TIGEAR-2 worm gear reducer with 50:1 ratio, hollow bore output, 56C frame, and 2.3" center distance. Quill input, cast iron housing, green paint. 0.95 HP input capacity, 0.66 HP output, 35 rpm maximum output speed, 1.4375" output bore diameter. Maintenance-free, ventless design with synthetic lubricant.
MODEL 23Q50H56
Contact supplier for technical support on: +1-864-284-5700
$1,324.70 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
2.5000 in, 63.5 mm
Bore dia output
1.4380 in, 36.525 mm
Bore length
6.6200 in, 168.148 mm
Capacity
0.95 HP input, 1182 in-lb output torque
Case size
23
Center Distance
2.3" between worm and gear
Center distance (in)
2.3 in, Center distance (in):2.3100 in, 58.674 mm
Finish
Green
Frame
56C flange mount
Gear Type
Worm gear, single-worm
Horsepower rating input
0.9500 hp, 0.708 kW
Horsepower rating output
0.6600 hp, 0.492 kW
Housing
Cast iron
Housing material
Cast iron
Input
56C flange
Input flange
56C
Input HP
0.95
Input style
Quill
Lubrication type
PAG, standard temperature
Material
Class 30 grey iron
Max RPM
35 rpm
Motor compatibility
NEMA motor, 56C frame
Mounting bolt pattern length
5.0000 in, 127.0 mm
Mounting bolt pattern width
2.8800 in, 73.152 mm
Nominal ratio
50
Output
Hollow bore, 1.4375" diameter
Output bore/shaft diameter
1.4375 in
Output horse power
0.66
Output shaft
Hollow
Output shaft center to input motor mounting face distance
5.4600 in, 138.684 mm
Output style
Hollow
Overhung load
1610 lbf, 7161.637 N
Paint type
Standard
Paint/coating
Green
Rated torque output
1182 in/lb, 1182.0 in/lb
Ratio
50 to 1
Reduction Ratio
50:1
Seal type
Single-lip contact
Suitable for washdown
No
Thermal horsepower rating
1.4200 hp, 1.059 kW
Specifications
- Catalog Number: 23Q50H56
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 50:1
- Output Style: Hollow Bore
- Output Shaft Diameter: 1.4375"
- Input Style: Quill
- Frame: 56C
- Center Distance: 2.3"
- Case Size: 23
- Housing Material: Cast Iron
- Paint: Green
- Weight: 48.0000 lb
SKU: 704413
Perfect fit and finish
Good product, perfect fit and finish, good price and fast shipping. Thanks
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#151957
Brand
Dodge
Model
23A50H56WP
#149028
Brand
Dodge
Model
23A50H56
#142488
Brand
Dodge
Model
23Q50H56
#6000734
Brand
Winsmith
Model
U2450HM56
#151529
Brand
Dodge
Model
23Q50H56WP
#6000734
Brand
Winsmith
Model
U2450HM56
SKU: 704413
Perfect fit and finish
Good product, perfect fit and finish, good price and fast shipping. Thanks
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/