We never sell your data to third parties
Dodge 20A15L56WP TIGEAR-2 right angle worm gear speed reducer with 15:1 ratio, 3-piece coupled input, left side solid output shaft 1" diameter, 56C frame, 2" center distance, cast iron housing, white epoxy finish. 1.69 HP input rating, 1.46 HP output. Totally enclosed, ventless design with synthetic lubricant for maintenance-free operation in any mounting position.
MODEL 20A15L56WP
Contact supplier for technical support on: +1-864-284-5700
$1,169.30 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
#5004040
Brand
Dodge
Model
202Q12R56WP
#5004241
Brand
Dodge
Model
20Q18L14WP
#151568
Brand
Dodge
Model
20ZBASEWP
#5004045
Brand
Dodge
Model
202Q18L56WP
Base to output center height
2.2400 in, 56.896 mm
Case size
20
Center Distance
2" (case size 20)
Center distance (in)
2 in, Center distance (in):2.0000 in, 50.8 mm
Center to end of shaft distance
4.6900 in, 119.126 mm
Finish
White epoxy
Gear Type
Worm gear right angle
Horsepower rating input
1.6900 hp, 1.26 kW
Horsepower rating output
1.4600 hp, 1.089 kW
Housing
Cast iron
Housing material
Cast iron
Input
56C flange
Input Configuration
3-piece coupled input
Input flange
56C
Input HP
1.69
Input style
3-Piece coupled
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 56C frame
Motor Frame
56C flange compatibility
Mounting bolt pattern length
5.0000 in, 127.0 mm
Mounting bolt pattern width
2.8800 in, 73.152 mm
Nominal ratio
15
Output
Left side solid output shaft
Output bore/shaft diameter
1 in
Output horse power
1.46
Output Shaft
Left side solid 1.0000" diameter
Output shaft center to input motor mounting face distance
7.8300 in, 198.882 mm
Output style
Left
Overhung load
1560 lbf, 6939.226 N
Paint type
White epoxy
Paint/coating
White
Power Rating
1.69 HP input, 790 in-lb output torque
Rated torque output
790 in/lb, 790.0 in/lb
Ratio
15 to 1
Reduction Ratio
15:1
Seal type
Single-lip contact
Shaft diameter output
1.0000 in, 25.4 mm
Shaft length output
2.1100 in, 53.594 mm
Suitable for washdown
No
Thermal horsepower rating
2.5200 hp, 1.879 kW
Specifications
- Catalog Number: 20A15L56WP
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 15:1
- Output Style: Left Side Solid Output Shaft
- Output Shaft Diameter: 1"
- Input Style: 3-Piece Coupled
- Frame: 56C
- Center Distance: 2"
- Case Size: 20
- Housing Material: Cast Iron
- Paint: White
- Weight: 52.0000 lb
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreSKU: 2835296
E20
This is exactly what I needed. Price was way below my local business that carries couplings. Thanks.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#2286119
Brand
Browning
Model
1011246
#1341594
Brand
Electra/Grove Gear
Model
GRL8210112.00
#1341522
Brand
Electra/Grove Gear
Model
GRL8210040.00
#6000230
Brand
Winsmith
Model
U2015SL56
| Brand | Flowtrend |
| Model | W73-2.5-E-KIT |
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreSKU: 2835296
E20
This is exactly what I needed. Price was way below my local business that carries couplings. Thanks.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/