We never sell your data to third parties
Dodge 23A10L14WP TIGEAR-2 worm gear speed reducer with 10:1 ratio, 3-piece coupled input, left side solid output shaft 1.25" diameter, 140TC C-face flange, 2.3" center distance, 3.42 HP input rating, cast iron housing, white epoxy paint finish. Suitable for moderate shock applications up to 10 hours daily in Class I service.
MODEL 23A10L14WP
Contact supplier for technical support on: +1-864-284-5700
$1,374.43 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
#142657
Brand
Dodge
Model
23ZJMOUNTWP
#5009300
Brand
Dodge
Model
23QZ05LR56WP
#142645
Brand
Dodge
Model
23ZBASEWP
#5009233
Brand
Dodge
Model
23Q12LR56WP
Base to output center height
2.5000 in, 63.5 mm
Case size
23
Center Distance
2.3" case size
Center distance (in)
2.3 in, Center distance (in):2.3100 in, 58.674 mm
Center to end of shaft distance
5.1400 in, 130.556 mm
Finish
White epoxy paint
Frame
140TC C-face motor flange
Gear Type
Right-angle worm gear
Horsepower rating input
3.4200 hp, 2.55 kW
Horsepower rating output
3.0700 hp, 2.289 kW
Housing
Cast iron
Housing material
Cast iron
Input
3-piece coupled
Input flange
140TC
Input HP
3.42
Input style
3-Piece coupled
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 140TC frame
Mounting bolt pattern length
5.0000 in, 127.0 mm
Mounting bolt pattern width
2.8800 in, 73.152 mm
Nominal ratio
10
Output
Left side solid shaft, 1.1250" diameter
Output bore/shaft diameter
1.25 in
Output horse power
3.07
Output shaft center to input motor mounting face distance
8.5800 in, 217.932 mm
Output style
Left
Overhung load
1610 lbf, 7161.637 N
Paint type
White epoxy
Paint/coating
White
Power Rating
3.42 HP input capacity
Rated torque output
1106 in/lb, 1106.0 in/lb
Ratio
10:1 reduction
Seal type
Single-lip contact
Shaft diameter output
1.1250 in, 28.575 mm
Shaft length output
2.1800 in, 55.372 mm
Suitable for washdown
No
Thermal horsepower rating
4.4000 hp, 3.281 kW
Torque Output
1, 106 in-lb
Specifications
- Catalog Number: 23A10L14WP
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 10:1
- Output Style: Left Side Solid Output Shaft
- Output Shaft Diameter: 1.25"
- Input Style: 3-Piece Coupled
- Frame: 140TC
- Center Distance: 2.3"
- Case Size: 23
- Housing Material: Cast Iron
- Paint: White
- Weight: 59.0000 lb
How should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#42685
Brand
Boston Gear
Model
F724-10-B7-G
#2299294
Brand
Morse
Model
XF1123
#2415768
Brand
Winsmith
Model
E24MDBS42000B7
#1319664
Brand
Electra/Grove Gear
Model
EL8240183.00
#1329834
Brand
Electra/Grove Gear
Model
GR8240075.00
#6000528
Brand
Winsmith
Model
U2410SL14
| Brand | PT Coupling |
| Model | 68462050 |
| Brand | BLACKSTAR |
| Model | BLS E 3 1/4 |
| Brand | BLACKSTAR |
| Model | BLS E 1 1/2 |
| Brand | E-Z Lok |
| Model | EK42115 |
| Brand | E-Z Lok |
| Model | SK41015 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/