We never sell your data to third parties
Dodge 17A20H56 TIGEAR-2 worm gear speed reducer with 20:1 ratio, 3-piece coupled input, hollow bore output, and 56C flange. 1.7" center distance, Class 30 grey iron housing with green paint. 1.03 HP input, 0.84 HP output, 1750 rpm maximum. Totally enclosed, ventless design for maintenance-free operation.
MODEL 17A20H56
Contact supplier for technical support on: +1-864-284-5700
$1,217.65 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Brand
Dodge
Model
17Q20H56SP
Brand
Dodge
Model
17Q20H56WP
Brand
Dodge
Model
17Q20H56LT
Brand
Winsmith
Model
U1820HE56
Base to output center height
1.9900 in, 50.546 mm
Bore dia output
1.0000 in, 25.4 mm
Bore length
5.4100 in, 137.414 mm
Case size
17
Center Distance
1.7" compact case
Center distance (in)
1.7 in, Center distance (in):1.7500 in, 44.45 mm
Finish
Green
Gear Ratio
20:1 reduction
Gearbox component type
Gearbox
Horsepower rating input
1.0300 hp, 0.768 kW
Horsepower rating output
0.8400 hp, 0.626 kW
Housing material
Cast iron
Housing Material
Cast iron class 30
Input
56C flange
Input flange
56C
Input HP
1.03
Input style
3-Piece coupled
Input Type
3-piece coupled motor connection
Lubrication type
PAG, standard temperature
Material
Class 30 grey iron
Max RPM
1750 RPM
Motor compatibility
NEMA motor, 56C frame
Motor Frame
56C flange compatibility
Mounting bolt pattern length
4.1900 in, 106.426 mm
Mounting bolt pattern width
2.7500 in, 69.85 mm
Nominal ratio
20
Output
Hollow bore
Output bore/shaft diameter
1 in
Output Configuration
Hollow bore
Output horse power
0.84
Output shaft
Hollow
Output shaft center to input motor mounting face distance
7.7300 in, 196.342 mm
Output style
Hollow
Output Torque
602 in-lb maximum
Overhung load
1190 lbf, 5293.384 N
Paint type
Standard
Paint/coating
Green
Power Rating
1.03 HP input capacity
Product Type
TIGEAR-2 right-angle worm gear speed reducer
Rated torque output
602 in/lb, 602.0 in/lb
Ratio
20 to 1
Seal type
Single-lip contact
Suitable for washdown
No
Thermal horsepower rating
1.5800 hp, 1.178 kW
Specifications
- Catalog Number: 17A20H56
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 20:1
- Output Style: Hollow Bore
- Output Shaft Diameter: 1"
- Input Style: 3-Piece Coupled
- Frame: 56C
- Center Distance: 1.7"
- Case Size: 17
- Housing Material: Cast Iron
- Paint: Green
- Weight: 46.0000 lb
SKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreSKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
Brand
Winsmith
Model
M1820HE56
Brand
Winsmith
Model
U1820HE56
| Brand | KSM |
| Model | LR5200NPPU |
| Brand | LYNX |
| Model | LNX 100-200 CHAIN PULLER |
| Brand | LYNX |
| Model | LNX 88C C/L |
| Brand | Rollway |
| Model | L-1311 |
| Brand | Precision Twist Drill |
| Model | 6001326 |
SKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreSKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/