We never sell your data to third parties
Dodge 26AZ10LR18WP TIGEAR-2 E-Z Kleen worm gear speed reducer, 10:1 ratio, 3-piece coupled input, double solid output shaft, 180TC flange, 2.6" center distance. Cast iron housing with white paint finish for food-grade applications. - Ratio: 10:1
- Center Distance: 2.6"
- Input: 180TC Flange
- Output Bore/Shaft Diameter: 1.25"
- Output: Double Solid Output Shaft
- Paint/Coating: White
- Housing Material: Cast Iron
- Housing Material: Cast Iron
- Input Horse Power: 4.83
- Output Horse Power: 4.37
MODEL 26AZ10LR18WP
Contact supplier for technical support on: +1-864-284-5700
$2,638.35 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
2.8700 in, 72.898 mm
Case size
26
Center Distance
2.6" compact case size 26
Center distance (in)
2.6 in, Center distance (in):2.6300 in, 66.802 mm
Center to end of shaft distance
5.6300 in, 143.002 mm
Finish
White epoxy
Gear Type
Right-angle worm gear
Gearbox component type
Gearbox
Horsepower rating input
4.8300 hp, 3.602 kW
Horsepower rating output
4.3700 hp, 3.259 kW
Housing material
Cast iron
Input
3-piece coupled (AZ designation)
Input flange
180TC
Input HP
4.83
Input Power
4.83 HP rated
Input style
3-Piece coupled
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 180TC frame
Motor Mount
180TC C-face flange
Mounting bolt pattern length
6.3800 in, 162.052 mm
Mounting bolt pattern width
3.3800 in, 85.852 mm
Nominal ratio
10
Output
Double solid shafts (LR) both sides, 1.1250" diameter
Output bore/shaft diameter
1.25 in
Output horse power
4.37
Output shaft center to input motor mounting face distance
9.5600 in, 242.824 mm
Output style
Left, right
Output Torque
1, 576 in-lb capacity
Overhung load
1610 lbf, 7161.637 N
Paint type
White epoxy
Paint/coating
White
Rated torque output
1576 in/lb, 1576.0 in/lb
Ratio
10:1 reduction
Seal type
Two-piece harsh duty
Shaft diameter output
1.1250 in, 28.575 mm
Shaft length output
2.6700 in, 67.818 mm
Suitable for washdown
Yes
Thermal horsepower rating
5.6100 hp, 4.183 kW
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read more
#5009496
Brand
Dodge
Model
26Q05L56WP
#144577
Brand
Dodge
Model
26QZ12R56WP
#153467
Brand
Dodge
Model
26QZ05R56WP
#144575
Brand
Dodge
Model
26QZ12LR56WP
#145457
Brand
Dodge
Model
26AZ10LR18WP
#152123
Brand
Dodge
Model
26QZ10LR18WP
#145107
Brand
Dodge
Model
26QZ10LR18
#145065
Brand
Dodge
Model
26AZ10LR18
#5999189
Brand
Winsmith
Model
M2610SB18
| Brand | Timken Belts |
| Model | RCP100-2 |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/