We never sell your data to third parties
Dodge 15S50R TIGEAR-2 worm gear speed reducer with 50:1 ratio, 1.5" center distance, right side solid output shaft 0.75" diameter, solid input shaft 0.5" diameter, 0.34 HP input, 0.22 HP output, cast iron housing, green finish. Separate belt-driven input configuration for flexible motor mounting. Suitable for Class I steady-load applications up to 10 hours per day.
MODEL 15S50R
Contact supplier for technical support on: +1-864-284-5700
$685.14 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
#142886
Brand
Dodge
Model
15S15LR
#151634
Brand
Dodge
Model
15S10LR
#5003833
Brand
Dodge
Model
15Q05L56LT
#5003813
Brand
Dodge
Model
15A05R14
Base to output center height
1.8700 in, 47.498 mm
Case size
15
Center Distance
1.5" (case size 15)
Center distance (in)
1.5 in, Center distance (in):1.5000 in, 38.1 mm
Center to end of shaft distance
4.3100 in, 109.474 mm
Finish
Green
Gearbox component type
Gearbox
Horsepower rating input
0.3400 hp, 0.254 kW
Horsepower rating output
0.2200 hp, 0.164 kW
Housing
Class 30 cast iron
Housing material
Cast iron
Input
Separate belt-driven
Input HP
0.34
Input style
Separate, Input style:Solid input shaft
Lubrication
Factory filled
Lubrication type
PAG, standard temperature
Mounting bolt pattern length
3.5000 in, 88.9 mm
Mounting bolt pattern width
2.2500 in, 57.15 mm
Nominal ratio
50
Output
Right side solid shaft, 0.7500" diameter
Output bore/shaft diameter
0.75 in
Output horse power
0.22
Output shaft
Right (solid B)
Output style
Right
Overhung load
710 lbf, 3158.237 N
Paint type
Standard
Paint/coating
Green
Power Rating
0.34 HP input capacity
Rated torque output
402 in/lb, 402.0 in/lb
Ratio
50 to 1
Reduction Ratio
50:1 standard TIGEAR-2 ratio
Seal type
Single-lip contact
Shaft dia input
0.5000 in
Shaft diameter output
0.7500 in, 19.05 mm
Shaft length input
1.1900 in, 30.226 mm
Shaft length output
2.2300 in, 56.642 mm
Suitable for washdown
No
Thermal horsepower rating
0.7000 hp, 0.522 kW
Torque Output
402 in-lb maximum
Specifications
- Catalog Number: 15S50R
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 50:1
- Output Style: Right Side Solid Output Shaft
- Output Shaft Diameter: 0.75"
- Input Style: Separate
- Center Distance: 1.5"
- Case Size: 15
- Housing Material: Cast Iron
- Paint: Green
- Weight: 22.0000 lb
SKU: 127693
Re-seller discount needed
Quick delivery, but I think you should raise your prices for end users and lower your prices for resellers like myself!
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
| Brand | Dichtomatik |
| Model | V5.00X153 |
SKU: 127693
Re-seller discount needed
Quick delivery, but I think you should raise your prices for end users and lower your prices for resellers like myself!
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/