We never sell your data to third parties
Dodge 26S10R TIGEAR-2 worm gear reducer with 10:1 ratio, solid input shaft, right side solid output shaft, 2.6" center distance, cast iron housing, green paint. 4.83 HP input, 4.37 HP output, 0.875" input shaft diameter, 1.25" output shaft diameter. Ventless design with synthetic lubricant for maintenance-free operation in any mounting position.
MODEL 26S10R
Contact supplier for technical support on: +1-864-284-5700
$1,225.93 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Base to output center height
2.8700 in, 72.898 mm
Case size
26
Center Distance
2.6" (size 26)
Center distance (in)
2.6 in, Center distance (in):2.6300 in, 66.802 mm
Center to end of shaft distance
5.6300 in, 143.002 mm
Family
TIGEAR-2 worm gear reducer
Finish
Standard green paint
Gearbox component type
Gearbox
Horsepower rating input
4.8300 hp, 3.602 kW
Horsepower rating output
4.3700 hp, 3.259 kW
Housing
Cast iron
Housing material
Cast iron
Input
0.875 in Input Shaft
Input HP
4.83
Input style
Separate, Input style:Solid input shaft
Input Type
Separate input (belt-driven)
Lubrication type
PAG, standard temperature
Mounting bolt pattern length
6.3800 in, 162.052 mm
Mounting bolt pattern width
3.3800 in, 85.852 mm
Nominal ratio
10
Output
Right side solid shaft 1.125"
Output bore/shaft diameter
1.25 in
Output horse power
4.37
Output shaft
Right (solid B)
Output style
Right
Overhung load
1610 lbf, 7161.637 N
Paint type
Standard
Paint/coating
Green
Power Rating
4.83 HP input
Rated torque output
1576 in/lb, 1576.0 in/lb
Ratio
10:1 reduction
Seal type
Single-lip contact
Shaft dia input
0.8750 in
Shaft diameter output
1.1250 in, 28.575 mm
Shaft length input
1.1700 in, 29.718 mm
Shaft length output
2.6700 in, 67.818 mm
Suitable for washdown
No
Thermal horsepower rating
5.6100 hp, 4.183 kW
Torque
1576 in-lb output
Specifications
- Catalog Number: 26S10R
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 10:1
- Output Style: Right Side Solid Output Shaft
- Output Shaft Diameter: 1.25"
- Input Style: Separate
- Center Distance: 2.6"
- Case Size: 26
- Housing Material: Cast Iron
- Paint: Green
- Weight: 50.0000 lb
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read more
#151756
Brand
Dodge
Model
26A07LR18
#5009403
Brand
Dodge
Model
26A12L18
#673447
Brand
Dodge
Model
26S12L
#151755
Brand
Dodge
Model
26A05R14
#151753
Brand
Dodge
Model
26S10R
#143374
Brand
Dodge
Model
26S10RWP
#5808881
Brand
Boston Gear
Model
726E-10KT-J4
#6000975
Brand
Winsmith
Model
U2610SR00
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/