We never sell your data to third parties
Dodge 47A05R25 TIGEAR-2 worm gear speed reducer with 5:1 ratio, 3-piece coupled input, right side solid output shaft, 250TC flange, and 4.7" center distance. Cast iron housing with green finish. Input horsepower 28.45, output horsepower 26.84, 2" output shaft diameter. Suitable for industrial power transmission applications requiring right-angle speed reduction.
MODEL 47A05R25
Contact supplier for technical support on: +1-864-284-5700
$6,150.39 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
5.3100 in, 134.874 mm
Case size
47
Center Distance
4.75" (case size 47)
Center distance (in)
4.7 in, Center distance (in):4.7500 in, 120.65 mm
Center to end of shaft distance
9.0600 in, 230.124 mm
Finish
Green
Gearbox component type
Gearbox
Horsepower rating input
28.4500 hp, 21.215 kW
Horsepower rating output
26.8400 hp, 20.015 kW
Housing material
Cast iron
Input
3-piece coupled, 250TC NEMA frame flange
Input flange
250TC
Input HP
28.45
Input style
3-Piece coupled
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 250TC frame
Mounting bolt pattern length
11.0000 in, 279.4 mm
Mounting bolt pattern width
5.8100 in, 147.574 mm
Nominal ratio
5
Output
Right side solid shaft, 2.0000" diameter
Output bore/shaft diameter
2 in
Output horse power
26.84
Output shaft
Right (solid B)
Output shaft center to input motor mounting face distance
14.5100 in, 368.554 mm
Output style
Right
Overhung load
5100 lbf, 22685.93 N
Paint type
Standard
Paint/coating
Green
Power Rating
28.45 HP input, 4, 832 in-lb output torque
Rated torque output
4832 in/lb, 4832.0 in/lb
Ratio
5 to 1
Reduction Ratio
5:1
Seal type
Single-lip contact
Shaft diameter output
2.0000 in, 50.8 mm
Shaft length output
4.0100 in, 101.854 mm
Suitable for washdown
No
Thermal horsepower rating
29.1200 hp, 21.715 kW
Specifications
- Catalog Number: 47A05R25
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 5:1
- Output Style: Right Side Solid Output Shaft
- Output Shaft Diameter: 2"
- Input Style: 3-Piece Coupled
- Frame: 250TC
- Center Distance: 4.75"
- Case Size: 47
- Housing Material: Cast Iron
- Paint: Green
- Weight: 219.0000 lb
SKU: 2835296
E20
This is exactly what I needed. Price was way below my local business that carries couplings. Thanks.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#5010390
Brand
Dodge
Model
47Q07R21
#143867
Brand
Dodge
Model
47A40LR18
#148897
Brand
Dodge
Model
47Q10L25
#151496
Brand
Dodge
Model
47Q30L18
#5010366
Brand
Dodge
Model
47A30R56
| Brand | RAB Lighting |
| Model | ALEDXL4TSFNB/480/WS2 |
| Brand | Champion |
| Model | US12-1-1/2 |
SKU: 2835296
E20
This is exactly what I needed. Price was way below my local business that carries couplings. Thanks.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/