We never sell your data to third parties
Dodge 15Q60H56 TIGEAR-2 worm gear speed reducer, 60:1 ratio, quill input, hollow bore output, 56C flange, 1.5" center distance. Cast iron housing with Class 30 grey iron construction, 0.29 HP input rating, 0.18 HP output, 29 rpm maximum output speed, 0.75" output bore. Totally enclosed green finish.
MODEL 15Q60H56
Contact supplier for technical support on: +1-864-284-5700
$958.65 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
1.8700 in, 47.498 mm
Bore dia output
0.7500 in, 19.05 mm
Bore length
4.7400 in, 120.396 mm
Case size
15
Center Distance
1.5" compact worm gear
Center distance (in)
1.5 in, Center distance (in):1.5000 in, 38.1 mm
Construction
Cast iron housing
Finish
Green
Frame Size
56C NEMA flange compatibility
Gearbox component type
Gearbox
Horsepower rating input
0.2900 hp, 0.216 kW
Horsepower rating output
0.1800 hp, 0.134 kW
Housing material
Cast iron
Input
56C flange
Input Configuration
Quill input
Input flange
56C
Input HP
0.29
Input style
Quill
Lubrication type
PAG, standard temperature
Material
Class 30 grey iron
Max RPM
29 rpm
Motor compatibility
NEMA motor, 56C frame
Mounting bolt pattern length
3.5000 in, 88.9 mm
Mounting bolt pattern width
2.2500 in, 57.15 mm
Nominal ratio
60
Output
Hollow bore
Output bore/shaft diameter
0.75 in
Output horse power
0.18
Output shaft
Hollow
Output shaft center to input motor mounting face distance
4.4000 in, 111.76 mm
Output style
Hollow
Overhung load
710 lbf, 3158.237 N
Paint type
Standard
Paint/coating
Green
Power Rating
0.29 HP input, 381 in-lb output torque
Rated torque output
381 in/lb, 381.0 in/lb
Ratio
60:1 gear reduction
Reducer Type
TIGEAR-2 right-angle worm gear speed reducer
Seal type
Single-lip contact
Suitable for washdown
No
Thermal horsepower rating
0.6200 hp, 0.462 kW
Specifications
- Catalog Number: 15Q60H56
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 60:1
- Output Style: Hollow Bore
- Output Shaft Diameter: 0.75"
- Input Style: Quill
- Frame: 56C
- Center Distance: 1.5"
- Case Size: 15
- Housing Material: Cast Iron
- Paint: Green
- Weight: 22.0000 lb
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 117869
Great price/great product
Shipping was fast and the price was best I could find. Product was new in a the sealed Dodge box. Perfect.
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 117869
Great price/great product
Shipping was fast and the price was best I could find. Product was new in a the sealed Dodge box. Perfect.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/