We never sell your data to third parties
Dodge SS17Q20H56 stainless steel TIGEAR-2 worm gear speed reducer. 20:1 ratio, 1.7" center distance, quill input, 1" hollow bore output, 56C frame. 1.03 HP input rating, 602 in-lb output torque. Corrosion-resistant for food/chemical applications. - Ratio: 20:1
- Center Distance: 1.7"
- Input: 56C Flange
- Output Bore/Shaft Diameter: 1"
- Output: Hollow Bore
- Paint/Coating: No
- Housing Material: Stainless Steel
- Housing Material: Stainless Steel
- Input Horse Power: 1.03
- Output Horse Power: 0.84
MODEL SS17Q20H56
Contact supplier for technical support on: +1-864-284-5700
$2,118.34 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Base to output center height
1.9900 in, 50.546 mm
Bore dia output
1.0000 in, 25.4 mm
Bore length
5.4100 in, 137.414 mm
Capacity
1.03 HP input, 602 in-lb output torque
Case size
17
Center Distance
1.7" compact
Center distance (in)
1.7 in, Center distance (in):1.7500 in, 44.45 mm
Gear Type
Worm gear, right-angle
Gearbox component type
Gearbox
Horsepower rating input
1.0300 hp, 0.768 kW
Horsepower rating output
0.8400 hp, 0.626 kW
Housing
Stainless steel
Housing material
Stainless steel
Input
56C flange
Input HP
1.03
Input style
Quill
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 56C frame
Mounting bolt pattern length
4.1900 in, 106.426 mm
Mounting bolt pattern width
2.7500 in, 69.85 mm
Nominal ratio
20
Output
1" hollow bore
Output bore/shaft diameter
1 in
Output horse power
0.84
Output shaft center to input motor mounting face distance
4.9200 in, 124.968 mm
Output style
Hollow
Overhung load
1190 lbf, 5293.384 N
Paint/coating
No
Rated torque output
602 in/lb, 602.0 in/lb
Ratio
20:1 speed reduction
Seal type
Two-piece harsh duty
Suitable for washdown
Yes
Thermal horsepower rating
1.5800 hp, 1.178 kW
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read more
| Brand | MROSupply Fasteners |
| Model | FSTPCK-116331 |
| Brand | Gates Rubber |
| Model | 8MX-48S-36 |
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/