We never sell your data to third parties
Dodge SS30Q25R18 TIGEAR-2 stainless steel worm gear speed reducer with 25:1 ratio, quill input, right side solid output shaft (1.375" diameter), 180TC flange, 3" center distance, 3.05 HP input, 2.54 HP output, and 2284 in-lb torque. Corrosion-resistant stainless steel housing for food and washdown environments.
MODEL SS30Q25R18
Contact supplier for technical support on: +1-864-284-5700
$3,544.41 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Base to output center height
3.2500 in, 82.55 mm
Case size
30
Center distance (in)
3 in, Center distance (in):3.0000 in, 76.2 mm
Center to end of shaft distance
6.7500 in, 171.45 mm
Dimensions
3" center distance, 79 lb unit weight
Gearbox component type
Gearbox
Horsepower rating input
3.0500 hp, 2.274 kW
Horsepower rating output
2.5400 hp, 1.894 kW
Housing
Stainless steel
Housing material
Stainless steel
Input
180TC flange
Input HP
3.05
Input style
Quill
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 180TC frame
Mounting bolt pattern width
7.0000 in, 177.8 mm
Nominal ratio
25
Output
Right side solid shaft, 1.375" diameter
Output bore/shaft diameter
1.375 in
Output horse power
2.54
Output shaft center to input motor mounting face distance
6.9300 in, 176.022 mm
Output style
Right
Overhung load
2300 lbf, 10230.91 N
Paint/coating
No
Performance
2284 in-lb output torque, 3.05 HP input rating
Rated torque output
2284 in/lb, 2284.0 in/lb
Ratio
25 to 1
Seal type
Two-piece harsh duty
Shaft diameter output
1.3750 in, 34.925 mm
Shaft length output
3.2000 in, 81.28 mm
Suitable for washdown
Yes
Thermal horsepower rating
3.9000 hp, 2.908 kW
Specifications
- Catalog Number: SS30Q25R18
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 25:1
- Output Style: Right Side Solid Output Shaft
- Output Shaft Diameter: 1.375"
- Input Style: Quill
- Frame: 180TC
- Center Distance: 3"
- Case Size: 30
- Housing Material: Stainless Steel
- Paint: Green
- Weight: 79.0000 lb
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#2248963
Brand
Dodge
Model
SS30A05L14
#2249120
Brand
Dodge
Model
SS30Q40R14
#142189
Brand
Dodge
Model
30Q25R18WP
#2248966
Brand
Dodge
Model
SS30A05LR18
#2249127
Brand
Dodge
Model
SS30Q50LR14
| Brand | SKF Bearing |
| Model | 71916 ACD/P4ADGA |
| Brand | Bestorq |
| Model | 5/8V2000 |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/