We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Morse 175Q56H30 015 XD1249 30:1 Ratio 1.75" Center Distance 0.625" Input Bore (C Face) C-Face Quill Input 0.938" Output Diameter Hollow Bore Output Cast Iron Single-Reduction Worm Reducer 30:1 Ratio, 1.75" Center Distance, 0.625" Input Bore (C Face), C-Face Quill Input, 0.938" Output Diameter, Hollow Bore Output, Cast Iron Single-Reduction Worm Reducer
MODEL XD1249
Contact supplier for technical support on: 800-626-2120
$635.54 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Center Distance Range
1" thru 3.25"
Centre Distance
1-3/4 in
Efficiency
80 %
Frame Size
56C
Gear Ratio
30:1
Gear Type
Worm
Height
5.75 in
HP
1
HP Range
1/2 to 3/4 HP (< 1)
Input Bore (C Face)
0.625
Input HP @ 1750 RPM
0.74
Input Keyway (C Face)
3/16x3/32
Input Maximum Speed
1750 rpm
Input Size
5/8 in Dia
Input Type
C-Face Quilled
Keyway Size
3/16 x 3/32 in Input/1/4 x 1/8 in Output
Length
7.33 in
Lubrication Type
Polyglycol Oil
Material
Cast Iron
Mounting Type
Direct/Floor
No. of Gear Reductions
Single
Output Diameter (in)
0.938
Output Maximum Speed
58.3 rpm
Output Size
15/16 in ID
Output Torque Range
500 to 1000 in lbs
Output Torque Rating (in-lb)
614 in-lbs @1750 input RPM
Output Type
Hollow
Overhung Load Rating (Output Shaft(lb))
1200
Reducer Style
Standard
Thrust Rating - output shaft
1144
Torque Rating
26.65 in-lb Input/58.3 in-lb Output
Type
Single Reduction Standard
Width
5.5 in
Regal Beloit Morse 175Q56H30 015
UPC: 662288996620 | UNSPSC: 25173800 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Morse® Raider® Plus Worm Gear Reducer, Single Reduction Standard, 30:1 Gear Ratio, 1 hp, C-Face Quilled Input, Hollow Output, 5/8 in Dia Input, 15/16 in ID Output, 58.3 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 26.65 in-lb Input/58.3 in-lb Output, 1-3/4 in Centre Distance, 3/16 x 3/32 in Input/1/4 x 1/8 in Output Keyway, 80 % Efficiency, Polyglycol Oil Lubrication, Direct/Floor Mount, Cast Iron, 7.33 in L x 5.5 in W x 5.75 in H
Features:
- Rugged cast iron housing provides maximum strength and dependability
- High lead angle worm is case hardened, ground and polished
- Large, single row ball bearings on input shaft to absorb radial and thrust loads at higher input speeds
- Tapered roller bearings are used on output shaft
- Forged bronze worm gears provide optimum balance of strength and wear
- Heavy duty tapered roller bearings on all output shafts
- 56C motor frame size
Certifications/Standards:
FDA Approved
Warranty:
1 Year
| Brand | Remke |
| Model | 109G0120AP |