We never sell your data to third parties
Morse Raider Plus 237Q56H60 2.37-inch center distance worm gear reducer with C-Face quill input, 60:1 ratio, and hollow bore output. Single-reduction unit for right-angle power transmission in industrial applications. Alternate catalog number XF1255.
MODEL XF1255
Contact supplier for technical support on: 800-626-2120
$1,917.52 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Center Distance Range
1" thru 3.25"
Centre Distance
2.37 in
Efficiency
80 %
Frame Size
56C
Gear Ratio
60:1
Gear Type
Worm
Height
6.94 in
HP
1
HP Range
1/2 to 3/4 HP (< 1)
Input Bore (C Face)
0.625
Input HP @ 1750 RPM
0.97
Input Keyway (C Face)
3/16 x 3/32
Input Maximum Speed
1750 rpm
Input Size
5/8 in Dia
Input Type
C-Face Quilled
Keyway Size
3/16 x 3/32 in Input/3/8 x 3 in Output
Length
8.4 in
Lubrication Type
Polyglycol Oil
Material
Cast Iron
No. of Gear Reductions
Single
Output Diameter (in)
1
Output Maximum Speed
29.1 rpm
Output Size
1 in ID
Output Torque Range
1000 to 2500 in lbs
Output Torque Rating (in-lb)
1418 in-lbs @1750 input RPM
Output Type
Hollow
Overhung Load Rating (Output Shaft(lb))
1770
Product Type
Worm Speed Reducer
Reducer Style
Standard
Thrust Rating - output shaft
2091
Torque Rating
34.93 in-lb Input/29.1 in-lb Output
Type
Single Reduction Standard
Width
6 in
Regal Beloit Morse 237Q56H60 100
UPC: 662288998563 | UNSPSC: 25173800 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Morse Raider Plus Worm Gear Reducer, Single Reduction Standard, 60:1 Gear Ratio, 1 hp, C-Face Quilled Input, Hollow Output, 5/8 in Dia Input, 1 in ID Output, 29.1 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 34.93 in-lb Input/29.1 in-lb Output, 2.37 in Centre Distance, 3/16 x 3/32 in Input/3/8 x 3 in Output Keyway, 80 % Efficiency, Polyglycol Oil Lubrication, Cast Iron, 8.4 in L x 6 in W x 6.94 in H
Features:
- Rugged cast iron housing provides maximum strength and dependability
- High lead angle worm is case hardened, ground and polished
- Large, single row ball bearings on input shaft to absorb radial and thrust loads at higher input speeds
- Tapered roller bearings are used on output shaft
- Forged bronze worm gears provide optimum balance of strength and wear
- Heavy duty tapered roller bearings on all output shafts
- 56C motor frame size
Certifications/Standards:
FDA Approved
1 Year
