We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Morse 262Q140H10 015 XG1282 10:1 Ratio 2.63" Center Distance 0.88" Input Bore (C Face) C-Face Quill Input 0.938" Output Diameter Hollow Bore Output Cast Iron Single-Reduction Worm Reducer 10:1 Ratio, 2.63" Center Distance, 0.88" Input Bore (C Face), C-Face Quill Input, 0.938" Output Diameter, Hollow Bore Output, Cast Iron Single-Reduction Worm Reducer
MODEL XG1282
Contact supplier for technical support on: 800-626-2120
$1,101.65 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Center Distance Range
1" thru 3.25"
Centre Distance
2.62 in
Efficiency
80 %
Frame Size
140TC
Gear Ratio
10:1
Gear Type
Worm
Height
8 in
HP
1
HP Range
3HP (< 5)
Input Bore (C Face)
0.88
Input HP @ 1750 RPM
4.956
Input Keyway (C Face)
3/16x3/32
Input Maximum Speed
1750 rpm
Input Size
0.88 in Dia
Input Type
C-Face Quilled
Keyway Size
3/16 x 3/32 in Input/3/8 x 3 in Output
Length
9.53 in
Lubrication Type
Polyglycol Oil
Material
Cast Iron
Mounting Type
Direct/Floor
No. of Gear Reductions
Single
Output Diameter (in)
0.938
Output Maximum Speed
175 rpm
Output Size
15/16 in Dia
Output Torque Range
1000 to 2500 in lbs
Output Torque Rating (in-lb)
1475 in-lbs @1750 input RPM
Output Type
Hollow
Overhung Load Rating (Output Shaft(lb))
1625
Reducer Style
Standard
Thrust Rating - output shaft
1762
Torque Rating
178.49 in-lb Input/175 in-lb Output
Type
Single Reduction Standard
Width
7 in
Regal Beloit Morse 262Q140H10 015
UPC: 662288999539 | UNSPSC: 25173800 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Morse® Raider® Plus Worm Gear Reducer, Single Reduction Standard, 10:1 Gear Ratio, 1 hp, C-Face Quilled Input, Hollow Output, 0.88 in Dia Input, 15/16 in Dia Output, 175 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 178.49 in-lb Input/175 in-lb Output, 2.62 in Centre Distance, 3/16 x 3/32 in Input/3/8 x 3 in Output Keyway, 80 % Efficiency, Polyglycol Oil Lubrication, Direct/Floor Mount, Cast Iron, 9.53 in L x 7 in W x 8 in H
Features:
- Rugged cast iron housing provides maximum strength and dependability
- High lead angle worm is case hardened, ground and polished
- Large, single row ball bearings on input shaft to absorb radial and thrust loads at higher input speeds
- Tapered roller bearings are used on output shaft
- Forged bronze worm gears provide optimum balance of strength and wear
- Heavy duty tapered roller bearings on all output shafts
- 143/145TC motor frame size
Certifications/Standards:
FDA Approved
Warranty:
1 Year
| Brand | Regal Cutting Tools |
| Model | 099710RM |
| Brand | Dormer Pramet |
| Model | 6707007 |
| Brand | Boston Gear |
| Model | 30231345 |
| Brand | Boston Gear |
| Model | 30231324 |