We never sell your data to third parties
Morse Raider Plus 262UH20 115 XG1215 2.62-inch center distance worm gear reducer with universal shaft input and 20:1 reduction ratio. This single-reduction unit features a hollow bore output and cast iron housing for durability in industrial power transmission applications. Morse is a Regal Rexnord brand.
MODEL XG1215
Contact supplier for technical support on: 800-626-2120
$1,798.52 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Center Distance (in)
2.63
Center Distance Range
1" thru 3.25"
Efficiency
80
Gear Ratio
20:1
Gear Type
Worm
Housing Material
Cast Iron
HP Range
2HP (< 3)
Input Diameter (in)
0.75
Input HP @ 1750 RPM
2.965
Input Speed
1750
Input Style
Shaft
Key Length
1.63
Key Sq.
0.188
Mounting Type
Shaft Mt
No. of Gear Reductions
Single
Output Diameter (in)
1.938
Output Shaft Direction
L or R
Output Torque Range
1000 to 2500 in lbs
Output Torque Rating (in-lb)
1836 in-lbs @1750 input RPM
Output Type
Hollow Bore
Overhung Load Rating (Output Shaft(lb))
1625
Product Type
Worm Speed Reducer
Ratio Range
20:1
Reducer Style
Standard
Series Code
Raider
Service Factor
1
Thrust Rating - output shaft
2091
Regal Beloit Morse 262UH20 115
UPC: 662288353966 | UNSPSC: 25173800 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Morse® Raider® Plus Worm Gear Reducer, Single Reduction Standard, 20:1 Gear Ratio, 1 hp, Universal Shaft-In Input, Hollow Output, 0.75 in Dia x 2.38 in L Input, 1-15/16 in ID Output, 87.5 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 106.78 in-lb Input/87.5 in-lb Output, 2.62 in Centre Distance, 0.1875 x 1.63 in Input/3/8 x 3 in Output Keyway, 80 % Efficiency, Polyglycol Oil Lubrication, Direct/Universal Mount, Cast Iron, 10.41 in L x 7 in W x 8 in H
Features:
- Rugged cast iron housing provides maximum strength and dependability
- High lead angle worm is case hardened, ground and polished
- Large, single row ball bearings on input shaft to absorb radial and thrust loads at higher input speeds
- Tapered roller bearings are used on output shaft
- Forged bronze worm gears provide optimum balance of strength and wear
- Heavy duty tapered roller bearings on all output shafts
Specs:
- Input Maximum Speed: 1750 rpm
- Output Maximum Speed: 87.5 rpm
- Centre Distance: 2.62 in
- Input Type: Universal Shaft-In
- Output Size: 1-15/16 in ID
- Input Size: 0.75 in Dia x 2.38 in L
- Lubrication Type: Polyglycol Oil
- Efficiency: 80 %
- Torque Rating: 106.78 in-lb Input/87.5 in-lb Output
- Horsepower: 1 hp
- Keyway Size: 0.1875 x 1.63 in Input/3/8 x 3 in Output
- Gear Ratio: 20:1
- Output Type: Hollow
- Mounting Type: Direct/Universal
- Dimensions: 10.41 in L x 7 in W x 8 in H
- Material: Cast Iron
- Type: Single Reduction Standard
Certifications/Standards:
FDA Approved
Warranty:
1 Year
#1330930
Brand
Electra/Grove Gear
Model
GR8260505.20
#40512
Brand
Boston Gear
Model
S726-20-G
#1320575
Brand
Electra/Grove Gear
Model
EL8260505.20
| Brand | Boston Gear |
| Model | S718-60-G |
| Brand | Gates Rubber |
| Model | 1215.11/16 |
| Brand | Rexnord |
| Model | HP8506 4 1/2 |
| Brand | IKO Bearing |
| Model | WS2542 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-344017 |