We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Morse 133Q56LR40 XB1088 40:1 Ratio 1.33" Center Distance 0.625" Input Bore (C Face) 0.625" Input Diameter C-Face Quill Input 0.625" Output Diameter Solid Shaft Output Cast Iron Single-Reduction Worm Reducer 40:1 Ratio, 1.33" Center Distance, 0.625" Input Bore (C Face), 0.625" Input Diameter, C-Face Quill Input, 0.625" Output Diameter, Solid Shaft Output, Cast Iron Single-Reduction Worm Reducer
MODEL XB1088
Contact supplier for technical support on: 800-626-2120
$772.12 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Assembly
Q-LR
Center Distance Range
1" thru 3.25"
Centre Distance
1.33 in
Efficiency
80 %
Frame Size
56C
Gear Ratio
40:1
Gear Type
Worm
H-Tap size
5/16 - 18
Height
4.66 in
HP
1
HP Range
1/3 HP or Less (< 1/2)
Input Bore (C Face)
0.625
Input HP @ 1750 RPM
0.26
Input Keyway (C Face)
3/16 X 3/32
Input Maximum Speed
1750 rpm
Input Size
5/8 in Dia
Input Type
C-Face Quilled
Keyway Size
1/8 x 1 in Input
Length
6.07 in
Lubrication Type
Polyglycol Oil
Material
Cast Iron
Model
133Q
Mounting Type
Direct/Floor
No. of Gear Reductions
Single
Output Diameter (in)
0.625
Output Key
3/16 X 1.31
Output Maximum Speed
43.7 rpm
Output RPM
43.7
Output Shaft Assembly Code
D
Output Shaft Direction
Double
Output Shaft Orientation
LR
Output Size
5/8 in Dia x 2.16 in L
Output Torque Range
250 to 500 in lbs
Output Torque Rating (in-lb)
322 in-lbs @1750 input RPM
Output Type
Left and Right
Overhung Load Rating (Output Shaft(lb))
458
Product Type
Worm Speed Reducer
Reducer
Worm - Right Angle
Reducer Style
Standard
Series Code
Raider
Service Factor
1
Shaft Seal Material
Nitrile
TAP Depth
0.5
Thrust Rating - output shaft
1399
Torque Rating
11.85 in-lb Input/43.7 in-lb Output
Type
Single Reduction Standard
Width
5.84 in
Regal Beloit Morse 133Q56LR40
UPC: 662288337867 | UNSPSC: 25173800 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Morse® Raider® Plus Worm Gear Reducer, Single Reduction Standard, 40:1 Gear Ratio, 1 hp, C-Face Quilled Input, Left and Right Output, 5/8 in Dia Input, 5/8 in Dia x 2.16 in L Output, 43.7 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 11.85 in-lb Input/43.7 in-lb Output, 1.33 in Centre Distance, 1/8 x 1 in Input Keyway, 80 % Efficiency, Polyglycol Oil Lubrication, Direct/Floor Mount, Cast Iron, 6.07 in L x 5.84 in W x 4.66 in H
Features:
- Rugged cast iron housing provides maximum strength and dependability
- High lead angle worm is case hardened, ground and polished
- Large, single row ball bearings on input shaft to absorb radial and thrust loads at higher input speeds
- Tapered roller bearings are used on output shaft
- Forged bronze worm gears provide optimum balance of strength and wear
- Heavy duty tapered roller bearings on all output shafts
- 56C motor frame size
Certifications/Standards:
FDA Approved
Warranty:
1 Year
| Brand | TB Woods |
| Model | SVS94B2138 |
| Brand | Gates Rubber |
| Model | N 3.7/16 |
| Brand | NSK Bearings |
| Model | 29414E |
| Brand | Link-Belt |
| Model | 10483599 |
| Brand | Hammond Power Solutions |
| Model | TE3A0118KG |
| Brand | Bunting Bearings |
| Model | AA040108 |
| Brand | Gates Rubber |
| Model | N 4.7/8 |
| Brand | Pramet |
| Model | 6761047 |