We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 15S30LLT TIGEAR-2 worm gear speed reducer with 30:1 ratio, 1.5" center distance, separate input, left side solid output shaft. Cast iron housing with green paint. 0.51 HP input, 413 in-lb output torque. Belt-driven configuration. - Ratio: 30:1
- Center Distance: 1.5"
- Input: 0.5" Input Shaft
- Output Bore/Shaft Diameter: 0.75"
- Output: Left Side Solid Output Shaft
- Paint/Coating: Green
- Housing Material: Cast Iron
- Housing Material: Cast Iron
- Input Horse Power: 0.51
- Output Horse Power: 0.38
MODEL 15S30LLT
Contact supplier for technical support on: +1-864-284-5700
$745.92 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Base to output center height
1.8700 in, 47.498 mm
Case size
15
Center distance (in)
1.5 in, Center distance (in):1.5000 in, 38.1 mm
Center to end of shaft distance
4.3100 in, 109.474 mm
Gearbox component type
Gearbox
Horsepower rating input
0.5100 hp, 0.38 kW
Horsepower rating output
0.3800 hp, 0.283 kW
Housing material
Cast iron
Input
0.5 in Input Shaft
Input HP
0.51
Input style
Separate
Lubrication type
PAG, low temperature
Mounting bolt pattern length
3.5000 in, 88.9 mm
Mounting bolt pattern width
2.2500 in, 57.15 mm
Nominal ratio
30
Output
Left side solid output shaft
Output bore/shaft diameter
0.75 in
Output horse power
0.38
Output style
Left
Overhung load
710 lbf, 3158.237 N
Paint type
Standard
Paint/coating
Green
Rated torque output
413 in/lb, 413.0 in/lb
Ratio
30 to 1
Seal type
Single-lip contact
Shaft dia input
0.5000 in
Shaft diameter output
0.7500 in, 19.05 mm
Shaft length input
1.1900 in, 30.226 mm
Shaft length output
2.2300 in, 56.642 mm
Suitable for washdown
No
Thermal horsepower rating
0.9600 hp, 0.716 kW
- Reducer Family: TIGEAR-2 worm gear speed reducer
- Gear Ratio: 30:1 reduction
- Center Distance: 1.5" (15 size)
- Input Type: Separate input for belt-driven applications
- Output Configuration: Left side solid output shaft
- Power Rating: 0.51 HP input capacity
- Torque Output: 413 in-lb maximum output torque
- Housing Material: Cast iron construction with green paint finish
- Applications: Belt conveyors, mixers, agitators, and general industrial drives requiring right-angle power transmission
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read more
#151634
Brand
Dodge
Model
15S10LR
#5003833
Brand
Dodge
Model
15Q05L56LT
#148938
Brand
Dodge
Model
15S50R
#142888
Brand
Dodge
Model
15S25L
#151636
Brand
Dodge
Model
15S20LR
| Brand | Timken Belts |
| Model | 1150M4 |
| Brand | Dixon |
| Model | ADA4020EZ |
| Brand | Hubbell Wiring |
| Model | HBL47472BBFFGY |
| Brand | Jason Industrial |
| Model | 6/5V1800 |
| Brand | Consolidated Bearings |
| Model | 81209 P/5 |
| Brand | Dichtomatik |
| Model | MA21-60X75X12 |
| Brand | HKK Chain |
| Model | A2050R10SS |
| Brand | Consolidated Bearings |
| Model | 32012 X P/5 |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/