We never sell your data to third parties
Dodge 23Q04R18 TIGEAR-2 worm gear speed reducer with 4:1 ratio, right side solid output shaft, 1.25" output bore, 180TC flange input, 2.3" center distance, cast iron housing, green paint. Quill input design for compact motor mounting. Input horsepower 5.6, output horsepower 5.22. Suitable for industrial power transmission applications requiring right-angle speed reduction.
MODEL 23Q04R18
Contact supplier for technical support on: +1-864-284-5700
$1,141.67 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
#5009224
Brand
Dodge
Model
23Q12L14
#5007565
Brand
Dodge
Model
232Q05R18
#5007577
Brand
Dodge
Model
232Q10L18
#5008523
Brand
Dodge
Model
233A05R18
Base to output center height
2.5000 in, 63.5 mm
Case size
23
Center Distance
2.3"
Center distance (in)
2.3 in, Center distance (in):2.3100 in, 58.674 mm
Center to end of shaft distance
5.1400 in, 130.556 mm
Frame Mount
180TC Flange
Horsepower rating input
5.6000 hp, 4.176 kW
Horsepower rating output
5.2200 hp, 3.893 kW
Housing material
Cast iron
Housing Material
Cast iron
Input
180TC flange
Input HP
5.6
Input style
Quill
Input Type
Quill
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 180TC frame
Mounting bolt pattern length
5.0000 in, 127.0 mm
Mounting bolt pattern width
2.8800 in, 73.152 mm
Nominal ratio
4
Output
Right side solid output shaft
Output bore/shaft diameter
1.25 in
Output Configuration
Right Side Solid Shaft - 1.125" diameter
Output horse power
5.22
Output shaft
Right (solid B)
Output shaft center to input motor mounting face distance
6.4900 in, 164.846 mm
Output style
Right
Output Torque
752 in-lb
Overhung load
1063 lbf, 4728.46 N
Paint type
Standard
Paint/coating
Green
Power Rating
5.6 HP input
Product Type
TIGEAR-2 Worm Gear Speed Reducer
Rated torque output
752 in/lb, 752.0 in/lb
Ratio
4:1
Seal type
Single-lip contact
Shaft diameter output
1.1250 in, 28.575 mm
Shaft length output
2.1800 in, 55.372 mm
Suitable for washdown
No
Thermal horsepower rating
7.0000 hp, 5.22 kW
Specifications
- Catalog Number: 23Q04R18
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 4:1
- Output Style: Right Side Solid Output Shaft
- Output Shaft Diameter: 1.25"
- Input Style: Quill
- Frame: 180TC
- Center Distance: 2.3"
- Case Size: 23
- Housing Material: Cast Iron
- Paint: Green
- Weight: 48.0000 lb
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
| Brand | Champion |
| Model | CM89HC-DRILL |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/