We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 23S12L TIGEAR-2 worm gear speed reducer, 12:1 ratio, separate input, left side solid output shaft 1.125" diameter, 2.3" center distance, cast iron housing, 1170 in-lb output torque, 2.91 HP input rating, green paint finish. - Ratio: 12:1
- Center Distance: 2.3"
- Input: 0.875" Input Shaft
- Output Bore/Shaft Diameter: 1.25"
- Output: Left Side Solid Output Shaft
- Paint/Coating: Green
- Housing Material: Cast Iron
- Housing Material: Cast Iron
- Input Horse Power: 2.91
- Output Horse Power: 2.56
MODEL 23S12L
Contact supplier for technical support on: +1-864-284-5700
$981.44 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Base to output center height
2.5000 in, 63.5 mm
Case size
23
Center distance (in)
2.3 in, Center distance (in):2.3100 in, 58.674 mm
Center to end of shaft distance
5.1400 in, 130.556 mm
Horsepower rating input
2.9100 hp, 2.17 kW
Horsepower rating output
2.5600 hp, 1.909 kW
Housing material
Cast iron
Input
0.875 in Input Shaft
Input HP
2.91
Input style
Separate
Lubrication type
PAG, standard temperature
Mounting bolt pattern length
5.0000 in, 127.0 mm
Mounting bolt pattern width
2.8800 in, 73.152 mm
Nominal ratio
12
Output
Left side solid output shaft
Output bore/shaft diameter
1.25 in
Output horse power
2.56
Output shaft
Left (solid A)
Output style
Left
Overhung load
1610 lbf, 7161.637 N
Paint type
Standard
Paint/coating
Green
Rated torque output
1170 in/lb, 1170.0 in/lb
Ratio
12 to 1
Seal type
Single-lip contact
Shaft dia input
0.8750 in
Shaft diameter output
1.1250 in, 28.575 mm
Shaft length input
1.1700 in, 29.718 mm
Shaft length output
2.1800 in, 55.372 mm
Suitable for washdown
No
Thermal horsepower rating
3.7800 hp, 2.819 kW
- Gear Type: Right-angle worm gear reducer
- Reduction Ratio: 12:1
- Center Distance: 2.3" (case size 23)
- Output: Left side solid shaft, 1.125" diameter
- Input: Separate belt-driven input (no motor flange)
- Housing: Cast iron construction with green paint finish
- Performance: 2.91 HP input rating, 1170 in-lb output torque
- Lubrication: Factory filled synthetic lubricant, maintenance-free design
- Applications: Belt conveyors, mixers, packaging equipment, general industrial drives requiring right-angle power transmission
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read more
#5008522
Brand
Dodge
Model
233A05L18
#5009227
Brand
Dodge
Model
23Q12L56
#5009333
Brand
Dodge
Model
23S12L
#5007565
Brand
Dodge
Model
232Q05R18
#5009224
Brand
Dodge
Model
23Q12L14
| Brand | Dixon |
| Model | A1S1-B |
| Brand | Hubbell Wiring |
| Model | WS1024NLA |
| Brand | Linn Gear |
| Model | SDSX1.562 |
| Brand | FK Bearing |
| Model | JFL12Y |
| Brand | Pramet |
| Model | 7809803 |
| Brand | TB Woods |
| Model | TL45454316 |
| Brand | NTN Bearing |
| Model | WPS106GRC |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/