We never sell your data to third parties
Dodge 35Q20R14 TIGEAR-2 worm gear speed reducer, 20:1 ratio, quill input, right side solid output shaft (1.5" diameter), 140TC frame flange, 3.5" center distance, cast iron housing, 5.79 HP input, 3,620 in-lb torque output.
MODEL 35Q20R14
Contact supplier for technical support on: +1-864-284-5700
$2,230.16 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
#142262
Brand
Dodge
Model
35Q15L14
#143574
Brand
Dodge
Model
35S10LR
#142259
Brand
Dodge
Model
35Q10LR14
#142261
Brand
Dodge
Model
35Q10R21
Base to output center height
3.9900 in, 101.346 mm
Capacity
5.79 HP input, 3, 620 in-lb output torque
Case size
35
Center Distance
3.5" (case size 35)
Center distance (in)
3.5 in, Center distance (in):3.5000 in, 88.9 mm
Center to end of shaft distance
7.0600 in, 179.324 mm
Finish
Standard Dodge green paint
Frame
140TC NEMA C-face motor flange
Gearbox component type
Gearbox
Horsepower rating input
5.7900 hp, 4.318 kW
Horsepower rating output
5.0300 hp, 3.751 kW
Housing
Cast iron
Housing material
Cast iron
Input
140TC flange
Input flange
140TC
Input HP
5.79
Input style
Quill
Lubrication type
PAG, standard temperature
Material
Class 30 grey iron
Max RPM
88 rpm
Motor compatibility
NEMA motor, 140TC frame
Mounting bolt pattern length
7.5000 in, 190.5 mm
Mounting bolt pattern width
4.0000 in, 101.6 mm
Nominal ratio
20
Output
Right side solid shaft, 1.5000" diameter
Output bore/shaft diameter
1.5 in
Output horse power
5.03
Output shaft
Right (solid B)
Output shaft center to input motor mounting face distance
7.0900 in, 180.086 mm
Output style
Right
Overhung load
2760 lbf, 12277.092 N
Paint type
Standard
Paint/coating
Green
Rated torque output
3620 in/lb, 3620.0 in/lb
Ratio
20:1
Seal type
Single-lip contact
Shaft diameter output
1.5000 in, 38.1 mm
Shaft length output
3.5100 in, 89.154 mm
Suitable for washdown
No
Thermal horsepower rating
5.9700 hp, 4.452 kW
Specifications
- Catalog Number: 35Q20R14
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 20:1
- Output Style: Right Side Solid Output Shaft
- Output Shaft Diameter: 1.5"
- Input Style: Quill
- Frame: 140TC
- Center Distance: 3.5"
- Case Size: 35
- Housing Material: Cast Iron
- Paint: Green
- Weight: 109.0000 lb
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#1334344
Brand
Electra/Grove Gear
Model
GR8420269.00
| Brand | Dichtomatik |
| Model | A40-115X123X5 |
| Brand | Bestorq |
| Model | 1092-14M-55 |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/