We never sell your data to third parties
Dodge SS20A25H14 stainless steel TIGEAR-2 worm gear reducer with 25:1 ratio, 1.25" hollow bore output, 3-piece coupled input, and 140TC flange mount. 2" center distance, 1.11 HP input rating, 0.88 HP output, and 788 in-lb output torque. Maintenance-free design with cast stainless steel housing for corrosion resistance in washdown environments.
MODEL SS20A25H14
Contact supplier for technical support on: +1-864-284-5700
$2,881.56 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Base to output center height
2.2400 in, 56.896 mm
Bore dia output
1.2500 in, 31.75 mm
Bore length
5.7000 in, 144.78 mm
Case size
20
Center Distance
2" (case size 20)
Center distance (in)
2 in, Center distance (in):2.0000 in, 50.8 mm
Gear Type
Worm gear, right-angle
Gearbox component type
Gearbox
Horsepower rating input
1.1100 hp, 0.828 kW
Horsepower rating output
0.8800 hp, 0.656 kW
Housing
Stainless steel
Housing material
Stainless steel
Input
3-piece coupled, 140TC NEMA frame
Input HP
1.11
Input style
3-Piece coupled
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 140TC frame
Mounting bolt pattern length
5.0000 in, 127.0 mm
Mounting bolt pattern width
2.8800 in, 73.152 mm
Nominal ratio
25
Output
1.25" hollow bore
Output bore/shaft diameter
1.25 in
Output horse power
0.88
Output shaft center to input motor mounting face distance
7.8500 in, 199.39 mm
Output style
Hollow
Overhung load
1560 lbf, 6939.226 N
Paint/coating
No
Performance
1.11 HP input rating, 788 in-lb output torque
Rated torque output
788 in/lb, 788.0 in/lb
Ratio
25:1 reduction
Seal type
Two-piece harsh duty
Suitable for washdown
Yes
Thermal horsepower rating
1.5900 hp, 1.186 kW
Specifications
- Catalog Number: SS20A25H14
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 25:1
- Output Style: Hollow Bore
- Output Shaft Diameter: 1.25"
- Input Style: 3-Piece Coupled
- Frame: 140TC
- Center Distance: 2"
- Case Size: 20
- Housing Material: Stainless Steel
- Paint: Green
- Weight: 42.0000 lb
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
| Brand | Harwal |
| Model | 10 x 14 x 03AO |
| Brand | Martin Sprocket |
| Model | 4 3V 600 TB |
| Brand | SKF Bearing |
| Model | SHR 19 |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/