We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Morse 175Q56H60 012 XD1228 60:1 Ratio 1.75" Center Distance 0.625" Input Bore (C Face) C-Face Quill Input 0.75" Output Diameter Hollow Bore Output Cast Iron Single-Reduction Worm Reducer 60:1 Ratio, 1.75" Center Distance, 0.625" Input Bore (C Face), C-Face Quill Input, 0.75" Output Diameter, Hollow Bore Output, Cast Iron Single-Reduction Worm Reducer
MODEL XD1228
Contact supplier for technical support on: 800-626-2120
$1,340.95 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Center Distance Range
1" thru 3.25"
Centre Distance
1-3/4 in
Efficiency
80 %
Frame Size
56C
Gear Ratio
60:1
Gear Type
Worm
Height
5.75 in
HP
1
HP Range
1/3 HP or Less (< 1/2)
Input Bore (C Face)
0.625
Input HP @ 1750 RPM
0.45
Input Keyway (C Face)
3/16x3/32
Input Maximum Speed
1750 rpm
Input Size
5/8 in Dia
Input Type
C-Face Quilled
Keyway Size
3/16 x 3/32 in Input/1/4 x 1/8 in Output
Length
7.33 in
Lubrication Type
Polyglycol Oil
Material
Cast Iron
Mounting Type
Direct/Floor
No. of Gear Reductions
Single
Output Diameter (in)
0.75
Output Maximum Speed
29.1 rpm
Output Size
3/4 in ID
Output Torque Range
500 to 1000 in lbs
Output Torque Rating (in-lb)
623 in-lbs @1750 input RPM
Output Type
Hollow
Overhung Load Rating (Output Shaft(lb))
1200
Product Type
Worm Speed Reducer
Reducer Style
Standard
Thrust Rating - output shaft
1144
Torque Rating
16.21 in-lb Input/29.1 in-lb Output
Type
Single Reduction Standard
Width
5.5 in
Regal Beloit Morse 175Q56H60 012
UPC: 662288996415 | UNSPSC: 25173800 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Morse® Raider® Plus Worm Gear Reducer, Single Reduction Standard, 60:1 Gear Ratio, 1 hp, C-Face Quilled Input, Hollow Output, 5/8 in Dia Input, 3/4 in ID Output, 29.1 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 16.21 in-lb Input/29.1 in-lb Output, 1-3/4 in Centre Distance, 3/16 x 3/32 in Input/1/4 x 1/8 in Output Keyway, 80 % Efficiency, Polyglycol Oil Lubrication, Direct/Floor Mount, Cast Iron, 7.33 in L x 5.5 in W x 5.75 in H
Features:
- Rugged cast iron housing provides maximum strength and dependability
- High lead angle worm is case hardened, ground and polished
- Large, single row ball bearings on input shaft to absorb radial and thrust loads at higher input speeds
- Tapered roller bearings are used on output shaft
- Forged bronze worm gears provide optimum balance of strength and wear
- Heavy duty tapered roller bearings on all output shafts
- 56C motor frame size
Certifications/Standards:
FDA Approved
Warranty:
1 Year
| Brand | SMC |
| Model | NCA325-03-Q8719-S |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-495060 |
| Brand | Consolidated Bearings |
| Model | H-3044 X 7-15/16 |