We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Morse 325Q140L50 XI1159 50:1 Ratio 3.25" Center Distance 0.875" Input Bore (C Face) 0.875" Input Diameter C-Face Quill Input 1.375" Output Diameter Solid Shaft Output Cast Iron Single-Reduction Worm Reducer 50:1 Ratio, 3.25" Center Distance, 0.875" Input Bore (C Face), 0.875" Input Diameter, C-Face Quill Input, 1.375" Output Diameter, Solid Shaft Output, Cast Iron Single-Reduction Worm Reducer
MODEL XI1159
Contact supplier for technical support on: 800-626-2120
$2,981.73 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Assembly
Q-L
Center Distance Range
1" thru 3.25"
Centre Distance
3-1/4 in
Efficiency
80
Frame Size
140TC
Gear Ratio
50:1
Gear Type
Worm
H-Tap size
7/16 - 14
HP
1
HP Range
2HP (< 3)
Input Bore (C Face)
0.875
Input HP @ 1750 RPM
2.05
Input Keyway (C Face)
3/16 X 3/32
Input Maximum Speed
1750 rpm
Input Size
0.63 in Dia
Input Type
C-Face Quilled
Keyway Size
0.1875 x 1.63 in Input
Length
11.16 in
Lubrication Type
Polyglycol Oil
Material
Cast Iron
Model
325Q
Mounting Type
Direct/Floor
No. of Gear Reductions
Single
Output Diameter (in)
1.375
Output Key
5/16 X 2.88
Output Maximum Speed
35 rpm
Output RPM
35
Output Shaft Assembly Code
L
Output Shaft Direction
Left
Output Size
1.38 in Dia x 3.66 in L
Output Torque Range
2500 to 5000 in lbs
Output Torque Rating (in-lb)
3315 in-lbs @1750 input RPM
Output Type
Left Hand
Overhung Load Rating (Output Shaft(lb))
2401
Product Type
Worm Speed Reducer
Reducer
Worm - Right Angle
Reducer Style
Standard
Series Code
Raider
Service Factor
1
Shaft Seal Material
Nitrile
TAP Depth
0.8
Thrust Rating - output shaft
3410
Torque Rating
88.67 in-lb Input/35 in-lb Output
Type
Single Reduction Standard
Width
10.7 in
Regal Beloit Morse 325Q140L50
UPC: 662288362081 | UNSPSC: 25173800 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Morse Raider Plus Worm Gear Reducer, Single Reduction Standard, 50:1 Gear Ratio, 1 hp, C-Face Quilled Input, Left Hand Output, 0.63 in Dia Input, 1.38 in Dia x 3.66 in L Output, 35 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 88.67 in-lb Input/35 in-lb Output, 3-1/4 in Centre Distance, 0.1875 x 1.63 in Input Keyway, Polyglycol Oil Lubrication, Direct/Floor Mount, Cast Iron, 11.16 in L x 10.7 in W
Features:
- Rugged cast iron housing provides maximum strength and dependability
- High lead angle worm is case hardened, ground and polished
- Large, single row ball bearings on input shaft to absorb radial and thrust loads at higher input speeds
- Tapered roller bearings are used on output shaft
- Forged bronze worm gears provide optimum balance of strength and wear
- Modular worm gear design provides over 10 million configurations from stock components
- 8810 offers further improvement to the standard chain series 881
- Dimensionally interchangeable with major industry competitors
Certifications/Standards:
FDA Approved
1 year
| Brand | MROSupply Fasteners |
| Model | FSTPCK-847097 |
| Brand | Hubbell Wiring |
| Model | HXJ5ETI25 |
| Brand | Dichtomatik |
| Model | 67189774 |
| Brand | United Abrasives |
| Model | 71266 |