Image for Illustration purposes only. Actual product may vary
- Brand: SPX Power Team
- Model: SPX 9609
- Condition: NEW
- SKU: 1966415
SPX 9609 VALVE-MANUAL 3 WAY TANDEM CTRView additional description
- Typically ships in: 1 day
- Weight: 8.7 lb
- Contact supplier for technical support on: 800-477-8326
Add to cart to see a price so low we can't advertise it!
Unit of measure: each
Application Single-acting cylinders. Actuation- Lever and adjustable, pressure compensated flow control valve. Functions- Cylinder piston "return," "hold," "controlled advance" (pressure compensated and "advance" (full blown). Will deliver relatively constant flow regardless of pressure between 1,000 and 10,000 psi. 10,000 PSI., 3/8” PORTS, 5 GPM MAX FLOW RATE. Used on these pumps- PA17, PA46, PA55, PE17, PE21, PE46, PE55, PE90, PE200, PG55, PG 120, PG400, PQ60 AND PQ120. Note: PE30 and PG30 can be used with mounting adapter kit 252161. CAUTION: To prevent sudden, uncontrolled descent of a load as it is being lowered, use a Load Lowering Valve (No. 9596) or Counter Balance Valve (No. 9720) in conjunction with the directional valve used in your application. IMPORTANT: Conversion kit 251528 must be used when mounting any of the valves on PA17 or PE17 pumps. IMPORTANT: When ordering any valve for a PE30 or PG30 series pump, ½” longer mounting screws are required. For valves 9500, 9501 and 9511, order four 12001 cap screws. For valves 9599 and 9605, order four 251078 cap screws. For valve 9609, order four 10855, cap screws.
|Order No.||Cylinder Application *||Operation||Valve Type||Volt||Advance / Return||Advance / Hold Return||Posi-Check Feature||Weight (lbs.)|
|9609||S.A.||Manual||3-way, 3 Pos. Tandem Center||—||No||Yes||No||8.7|
found you on line- less expensive then what I was paying, no delivery charge, quick delivery! What's not to like ? Call you in a couple months when I need more.Read more
Disclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.
ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.
ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:
a. Product brand name
c. IDC-USA’s product identification number
d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.
AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.
Product Qualification: All products returned must be:
a. On the current price list
b. In good resale condition
c. In the original packaging
d. Purchased from IDC-USA within 3 years of the return
e. Stock items only; no special order items
f. Only those items which have been approved
VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.
RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.
FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.