We never sell your data to third parties
Gates CX300 is a Tri-Power Cogged V-Belt with CX section and 300" effective length. Designed for industrial drives requiring higher horsepower capacity and reduced bending resistance. The cogged construction provides improved flexibility and heat dissipation compared to wrapped belts.
MODEL CX300
TB Woods
$220.00
Gates Rubber
$236.99
Call to confirm
Timken Belts
$163.66
Call to confirm
Contact supplier for technical support on: 303-744-5800
$236.99 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Angle
40
Belt Back Side
Smooth
Belt Inside
Smooth
Cogged
Yes
Color
Black
Construction
Bandless
Cord Material
Polyester
Depth
17/32 in
Depth (per rib)
17/32 in
Effective Length (in)
298
Material
EPDM
Minimum Pulley Diameter
7.958 in
Number ribs
1
Outside circumference (in)
302
outside length
302 in
Reinforced Material
Flex-Bonded Polyester
Section
CX
Series
9014
Sided
Single Sided
Static Conductive
Yes
Temperature Range
-70 to 250 deg F
Thickness (in)
0.55
Top width
7/8 in
Top Width (in)
0.88
Top width (per rib)
7/8 in
Type
Banded Heavy Duty Cut Notch
Application
| Category Name Description | Constructed with Gates proprietary construction, this belt has a superior combination of flex and load carrying capacity, as well as less stretch resulting in less maintenance. |
|---|---|
| Features Advantages | Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration. Meets ARPM / RMA IP-3-2 oil and heat resistant standards. Meets ARPM / RMA IP-3-3 static conductivity requirements. Notches molded into the belt during manufacturing increase flexibility making this belt well suited for drives with smaller diameter sheaves. Belt Edge is machined for even sheave groove contact resulting in smoother running, less slip and wear. Patented Ethylene Material construction provides -70°F to +250°F temperature range to resist belt cracking. |
| Markets/Applications | Suitable for all industrial applications, particularly where small or sub-minimal sheave diameters are required. |
Belt / Sprocket Specifications
| Outside Circumference (in) | 302 |
|---|---|
| Recommended Sheaves | Multi-Duty Sheaves |
Notes
| Automotive Notes | Tri-Power belts are available in AX, BX, and CX sizes. Tri-Power belts longer than 210 inches are a banded, cut notch construction. |
|---|---|
Packaging
| Customer Pack | 1.0 |
|---|---|
| Standard Pack | 4 |
Weight
| Weight (Lbs.) | 6.75 |
|---|
SKU: 1245032
Great parts
Found the belts I needed here at the best price available. very fast shipping, great service. will be doing business again. Thank you.
Read moreSKU: 5932890
Gt4 cog belt
I've not had a chance to try it out but if it's at least as good as the 150 hours I had on the GT2 belt when I decided to replace it, I'll be a happy camper!
Read moreSKU: 183305
Great deal
Very good customer service, great prices and super fast shipping!!! Will buy again!!
Read moreSKU: 2788490
Great service!
I needed a hydraulic pump belt and found it at MRO Supply. Great prices and fast shipping, will order again. Thank you very much!
Read more
| Brand | Consolidated Bearings |
| Model | 29244 |
| Brand | Champion |
| Model | CM79-1-3/4 |
SKU: 1245032
Great parts
Found the belts I needed here at the best price available. very fast shipping, great service. will be doing business again. Thank you.
Read moreSKU: 5932890
Gt4 cog belt
I've not had a chance to try it out but if it's at least as good as the 150 hours I had on the GT2 belt when I decided to replace it, I'll be a happy camper!
Read moreSKU: 183305
Great deal
Very good customer service, great prices and super fast shipping!!! Will buy again!!
Read moreSKU: 2788490
Great service!
I needed a hydraulic pump belt and found it at MRO Supply. Great prices and fast shipping, will order again. Thank you very much!
Read moreIn order to be eligible for a return, product to be returned must be at least $150 US. Items must be unused and unmounted, in resalable condition. Return authorization must be requested, no credit or exchanges will be granted if items are shipped back without return authorization or if items are not in resalable condition. Re-stocking fee is $60 US flat, cannot be voided if placing an off-setting order. Made To Order items are Non-Returnable and Non-Cancellable.