We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Gates 93885045 5/3VX450 Super HC Molded Notch PowerBand Belts - Cross Section: 3VX
- Strands: 5
- Sectional Top Width: 3/8"
- Total Top Width: 1 7/8"
- Depth: 21/64"
- Outside Circumference: 45.00"
- Material ID: 93885045
The PowerBand construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave groove. Recommended for multiple V-belt drives exposed to pulsating or heavy shock loads which can make belts whip, turn over, slip, or jump off the drive.
- Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration.
- Notches molded into the belt during manufacturing increase flexibility, making this belt well suited for drives with smaller diameter sheaves.
- Patented Ethylene (EPDM) Material construction provides -51C to +121C (-60F to +250F) temperature range to resist belt cracking.
- The Tie Band assures high lateral rigidity, guiding the belt" a straight line and preventing it from coming off the drive.
- Meets RMA oil and heat resistant standards and static conductivity requirements.
MODEL 5/3VX450
This vendor has a minimum order quantity of 2. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
Contact supplier for technical support on: 303-744-5800
$116.93 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Brand Minimum Order Quantity: 2
Typically Ships in: 1 day
Returnable: See conditions
Angle
38
Belt Back Side
Smooth
Belt Inside
Notched
cogged
Yes
Color
Black
Construction
Bandless
Cord Material
Polyester
depth
21/64 in
depth (per rib)
21/64 in
Effective Length (in)
44.81
Material
EPDM
Minimum Pulley Diameter
3.82 in
number ribs
5
Outside circumference (in)
45
outside length
45 in
Reinforced Material
Flex-Bonded Polyester
section
3VX
Series
9388
Sided
Single Sided
Static Conductive
No
Temperature Range
-60 to 250 deg F
Thickness (in)
0.35
top width
3/8 in
Top Width (in)
2
top width (per rib)
3/8 in
Type
Heavy Duty Molded Notch
The PowerBand construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave groove. Recommended for multiple V-belt drives exposed to pulsating or heavy shock loads which can make belts whip, turn over, slip, or jump off the drive.
- Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration.
- Notches molded into the belt during manufacturing increase flexibility, making this belt well suited for drives with smaller diameter sheaves.
- Patented Ethylene (EPDM) Material construction provides -51°C to +121°C (-60°F to +250°F) temperature range to resist belt cracking.
- The Tie Band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive.
- Meets RMA oil and heat resistant standards and static conductivity requirements.
SKU: 177444
Mechanic
Cut the bell when you said I would get a chance to install it seems to fit I still need to test drive
Read moreSKU: 2788490
Great service!
I needed a hydraulic pump belt and found it at MRO Supply. Great prices and fast shipping, will order again. Thank you very much!
Read more
#678550
Brand
Bando
Model
5-3VX450
#2021762
Brand
Timken Belts
Model
R3VX450-5
#2243538
Brand
Bestorq
Model
5/3VX450
#1986142
Brand
Jason Industrial
Model
5/3VX450
#836743
Brand
TB Woods
Model
5R3VX450
| Brand | Fenner Industrial Motion |
| Model | 4940056 |
| Brand | NTN Bearing |
| Model | UCP-1.7/16 |
| Brand | Timken |
| Model | JLM710949C-90C03 |
| Brand | U.S. Seal Mfg. |
| Model | PS-3718V |
| Brand | NTN Bearing |
| Model | M241547 |
| Brand | Bestorq |
| Model | 2/8VX1120 |
| Brand | Pramet |
| Model | 6752415 |
SKU: 177444
Mechanic
Cut the bell when you said I would get a chance to install it seems to fit I still need to test drive
Read moreSKU: 2788490
Great service!
I needed a hydraulic pump belt and found it at MRO Supply. Great prices and fast shipping, will order again. Thank you very much!
Read moreIn order to be eligible for a return, product to be returned must be at least $150 US. Items must be unused and unmounted, in resalable condition. Return authorization must be requested, no credit or exchanges will be granted if items are shipped back without return authorization or if items are not in resalable condition. Re-stocking fee is $60 US flat, cannot be voided if placing an off-setting order. Made To Order items are Non-Returnable and Non-Cancellable.