We never sell your data to third parties
SKF TKBA 31 belt alignment tool uses a visible laser beam to measure angular and parallel misalignment of pulleys and belt drives. Battery-operated with magnetic mounting for quick attachment to pulley faces. Suitable for maintenance and installation of belt-driven systems in industrial machinery.
MODEL TKBA 31
$2,385.63 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Battery
3x AAA (Alkaline (incl.) or Rechargable)
Battery Life
6 h
Case Dimensions (l X H X W)
360 x 110 x 260 mm
Colour
Blue;Dark Grey
Degree of Protection (IP)
IP 40
Housing
PC/ABS blend, overmoulded with TPU rubber
Laser Line Length (at 2 M)
2.4 m
Laser Power Class
2
Laser Power Max
1 mW
Laser Type
Visible green line laser
Laser Wavelength
520 nm
Measurement Accuracy Angular (at 2 M)
0.02 °
Measurement Accuracy Offset
0.5 mm
Measurement Distance
50-6000 mm
Mounting
Magnetic, side mounted
Operating Temperature Range
0-40 °C
Pack Height
112 mm
Pack Length
360 mm
Pack Width
265 mm
Recommended Storage Temperature
-20-60 °C
Relative Humidity
10 to 90%, non-condensing
Target Dimensions (l X H X W)
98 x 97 x 52 mm
Target Type
Second transmitter unit or set of 3 passive targets
Target Weight
0.25 kg
Transmitter Dimensions (l X H X W)
98 x 97 x 52 mm
Transmitter Weight
0.25 kg
The TKBA 31 alignment tool has two components: a laser-emitting unit and a receiver unit. Each is attached quickly and easily – using a powerful magnet – to the inside or outside face of a belt pulley or chain sprocket. The TKBA 31 can be applied to most machines that use V belts, banded belts and ribbed belts – as well as those with chain sprockets. The TKBA 31 uses a green laser diode and can be used for long distances – including outdoors in sunny conditions. The alignment tool is delivered in a case with additional items like belt tension checkers and extra targets to support a professional alignment job.
- Fast, easy attachment – using powerful magnets
- Two laser receiver units
- Three targets - for simple alignment jobs
- Belt tension checkers - to support a correct belt tension and avoid wear of the belt and pulley
- Wear check gauges – helps to detect early wear on pulleys
- Simultaneous adjustment of tension and alignment
- Applicable to most machines using V belts, banded belts, ribbed belts – as well as chain sprockets
- Uses a green laser diode which is highly visual in day light and can be used for long distances
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF