MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
Gates 90142240 CX240 Tri-Power Belts
MODEL CX240
Bando
$250.33
TB Woods
$160.00
Gates Rubber
$142.84
Jason Industrial
$153.60
Timken Belts
$130.68
Call to confirm
MasterDrive
$150.13
Bestorq
$140.42
This vendor has a minimum order quantity of 2. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
Contact supplier for technical support on: 303-744-5800
$142.84 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Brand Minimum Order Quantity: 2
Typically Ships in: 1 day
Returnable: See conditions
Angle
40
Belt Back Side
Smooth
Belt Inside
Smooth
Cogged
Yes
Color
Black
Construction
Bandless
Cord Material
Polyester
Depth
17/32 in
Depth (per rib)
17/32 in
Effective Length (in)
238
Material
EPDM
Minimum Pulley Diameter
7.958 in
Number ribs
1
Outside circumference (in)
242
outside length
242 in
Reinforced Material
Flex-Bonded Polyester
Section
CX
Series
9014
Sided
Single Sided
Static Conductive
Yes
Temperature Range
-70 to 250 deg F
Thickness (in)
0.55
Top width
7/8 in
Top Width (in)
0.88
Top width (per rib)
7/8 in
Type
Banded Heavy Duty Cut Notch
Built for superior performance on heavy-duty classical cross-section drives. The raw edge, Ethylene Elastomer construction and special notch design makes the Tri-Power belt especially suited for small diameter pulleys and back-side idler drives.
- Belt edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear.
- Flex-bonded cords are strongly forged to the belt body, resulting in equal load distribution and absorption of bending stress without cord deterioration. 15% capacity increase over wrapped belts.
- Notches molded into the belt during manufacturing increase flexibility, making this belt well suited for drives with smaller diameter sheaves.
- Suitable for all industrial applications, particularly where small or sub-minimal sheave diameters are required.
- Meets ARPM/RMA IP-3-2 oil and heat resistant standards and IP-3-3 static conductivity requirements.REACH and RoHS 2 compliant.
PERFECT BELTS FOR IMPERFECT CONDITIONS.
Over time, belts fail from heat cracks, stretching or excessive wear. Belt retensioning and replacement leads to downtime, inefficiency and loss of productivity. Only Gates molded notch V-belts, including our Tri-Power molded notch belt line, offer a patented, new ethylene construction to keep your operations running when other belts fail.
Features and Benefits
- Flex-Bonded tensile cords are strongly forged to the body of the belt, resulting in equal load distribution with absorption of bending stress and separation without cord deterioration.
- Notches molded into the belt during manufacturing increase flexibility, making this belt well suited for drives with smaller diameter sheaves.
- Tri-Power belts are available in AX, BX, and CX sizes.
EQUIPPED FOR YOUR OPERATING ENVIRONMENT.
Featuring a composite, multi-purpose construction, Gates heavy-duty Tri-Power Belts resist oil, heat, contaminants, tensile and flexing forces, fatigue, and shock loads. We've even engineered our proprietary EPDM belt material to combat self-igniting, meaning your belt won't catch fire from heat build-up, even with severe slippage.
SKU: 5932890
Gt4 cog belt
I've not had a chance to try it out but if it's at least as good as the 150 hours I had on the GT2 belt when I decided to replace it, I'll be a happy camper!
Read moreSKU: 179389
Gates b-55 belt
We use these belts on wastewater lagoon aerators which run 24/7. Great price for a high quality belt and receive them within a few days of ordering!
Read moreSKU: 1245113
Great belts
Bought these for my lathe. They are much better made than the original. MROSupply charges a very competitive price and the packaging and shipping speed was great.
Read moreSKU: 1245032
Great parts
Found the belts I needed here at the best price available. very fast shipping, great service. will be doing business again. Thank you.
Read more
| Brand | Nachi Bearing |
| Model | 6209C3 |
| Brand | Dodge |
| Model | F4B-SC-115-NL |
| Brand | SEW Eurodrive |
| Model | SA57 D16 DRN80M4 |
| Brand | Boston Gear |
| Model | ND12B-1/2 |
| Brand | SEW Eurodrive |
| Model | R77 DRN90L4 SO # 87.7635633401.0002.18.60 |
| Brand | Dodge |
| Model | 117017 |
| Brand | Timken |
| Model | YCJ1 3/4 SGT |
| Brand | Airmaster |
| Model | 24391 |
SKU: 5932890
Gt4 cog belt
I've not had a chance to try it out but if it's at least as good as the 150 hours I had on the GT2 belt when I decided to replace it, I'll be a happy camper!
Read moreSKU: 179389
Gates b-55 belt
We use these belts on wastewater lagoon aerators which run 24/7. Great price for a high quality belt and receive them within a few days of ordering!
Read moreSKU: 1245113
Great belts
Bought these for my lathe. They are much better made than the original. MROSupply charges a very competitive price and the packaging and shipping speed was great.
Read moreSKU: 1245032
Great parts
Found the belts I needed here at the best price available. very fast shipping, great service. will be doing business again. Thank you.
Read moreIn order to be eligible for a return, product to be returned must be at least $150 US. Items must be unused and unmounted, in resalable condition. Return authorization must be requested, no credit or exchanges will be granted if items are shipped back without return authorization or if items are not in resalable condition. Re-stocking fee is $60 US flat, cannot be voided if placing an off-setting order. Made To Order items are Non-Returnable and Non-Cancellable.