We never sell your data to third parties
Gates 90142085 CX85 Tri-Power Cogged V-Belt with CX section and 85" effective length. Cogged construction enhances flexibility and heat dissipation for industrial drives requiring higher horsepower capacity. Fiber-loaded EPDM compound resists wear and cracking under heavy loads.
MODEL CX85
Gates Rubber
$55.03
Call to confirm
Bando
$59.60
TB Woods
$65.00
Jason Industrial
$54.86
Timken Belts
$60.21
Call to confirm
Bestorq
$35.03
MasterDrive
$53.65
This vendor has a minimum order quantity of 3. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
Contact supplier for technical support on: 303-744-5800
$55.03 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Brand Minimum Order Quantity: 3
Typically Ships in: 1 day
Returnable: See conditions
Angle
38
Belt Back Side
Smooth
Belt Inside
Notched
Cogged
Yes
Color
Black
Construction
Bandless
Cord Material
Polyester
Depth
17/32 in
Depth (per rib)
17/32 in
Effective Length (in)
88.29
Material
EPDM
Minimum Pulley Diameter
7.958 in
Number ribs
1
Outside circumference (in)
89
outside length
89 in
Reinforced Material
Flex-Bonded Polyester
Section
CX
Series
9014
Sided
Single Sided
Static Conductive
Yes
Temperature Range
-70 to 250 deg F
Thickness (in)
0.51
Top width
7/8 in
Top Width (in)
0.88
Top width (per rib)
7/8 in
Type
Heavy Duty Molded Notch
Built for superior performance on heavy-duty classical cross-section drives. The raw edge, Ethylene Elastomer construction and special notch design makes the Tri-Power belt especially suited for small diameter pulleys and back-side idler drives.
- Belt edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear.
- Flex-bonded cords are strongly forged to the belt body, resulting in equal load distribution and absorption of bending stress without cord deterioration. 15% capacity increase over wrapped belts.
- Notches molded into the belt during manufacturing increase flexibility, making this belt well suited for drives with smaller diameter sheaves.
- Suitable for all industrial applications, particularly where small or sub-minimal sheave diameters are required.
- Meets ARPM/RMA IP-3-2 oil and heat resistant standards and IP-3-3 static conductivity requirements.REACH and RoHS 2 compliant.
PERFECT BELTS FOR IMPERFECT CONDITIONS.
Over time, belts fail from heat cracks, stretching or excessive wear. Belt retensioning and replacement leads to downtime, inefficiency and loss of productivity. Only Gates molded notch V-belts, including our Tri-Power molded notch belt line, offer a patented, new ethylene construction to keep your operations running when other belts fail.
Features and Benefits
- Flex-Bonded tensile cords are strongly forged to the body of the belt, resulting in equal load distribution with absorption of bending stress and separation without cord deterioration.
- Notches molded into the belt during manufacturing increase flexibility, making this belt well suited for drives with smaller diameter sheaves.
- Tri-Power belts are available in AX, BX, and CX sizes.
EQUIPPED FOR YOUR OPERATING ENVIRONMENT.
Featuring a composite, multi-purpose construction, Gates heavy-duty Tri-Power Belts resist oil, heat, contaminants, tensile and flexing forces, fatigue, and shock loads. We've even engineered our proprietary EPDM belt material to combat self-igniting, meaning your belt won't catch fire from heat build-up, even with severe slippage.
SKU: 172159
Thank you!
First time customer and I will return! I will tell all of our associates what excellent service we received! You saved us from an ugly situation. With a hefty order needing to go out and the belt broke on our Seiki mill. I called on Friday. I wasn't even expecting shipment until the following Monday or Tuesday but we received our belt the very next day!! The price was fantastic, not to mention FREE shipping!!! I want to thank everyone from the sales agent to the packing and shipping department. Seriously....this was the best service we've received in ages! The "Keiths" Little Cake Machine Shop Edmonton, KY
Read more
| Brand | INA Bearing |
| Model | WZFS1L36 |
| Brand | JW Winco |
| Model | 146-B21/2-80-2-BL |
| Brand | HUCO Products |
| Model | 540.41.3338 |
| Brand | NK North America Inc. |
| Model | K0671.2400XCS |
| Brand | KOP-FLEX |
| Model | 1070 HUBX 2 1/4 |
SKU: 172159
Thank you!
First time customer and I will return! I will tell all of our associates what excellent service we received! You saved us from an ugly situation. With a hefty order needing to go out and the belt broke on our Seiki mill. I called on Friday. I wasn't even expecting shipment until the following Monday or Tuesday but we received our belt the very next day!! The price was fantastic, not to mention FREE shipping!!! I want to thank everyone from the sales agent to the packing and shipping department. Seriously....this was the best service we've received in ages! The "Keiths" Little Cake Machine Shop Edmonton, KY
Read moreIn order to be eligible for a return, product to be returned must be at least $150 US. Items must be unused and unmounted, in resalable condition. Return authorization must be requested, no credit or exchanges will be granted if items are shipped back without return authorization or if items are not in resalable condition. Re-stocking fee is $60 US flat, cannot be voided if placing an off-setting order. Made To Order items are Non-Returnable and Non-Cancellable.