MROSupply Has Hundreds Of Brands, Millions Of Products, Including
$365.50 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Adjustable rated motor current
No
By-pass signal relay
No
Communication
FiledBusPlug(Optional)
Connecting capacity control circuit
1 x 0.75 ... 2.52 x 0.75 ... 2.5 mm²Rigid 1/2 x 0.75 ... 2.5 mm²
Connecting capacity main circuit
Rigid 1/2 x 0.75 ... 2.5 mm²
Connecting capacity supply circuit
Rigid 1/2 x 0.75 ... 2.5 mm²
Current limit function
No
Degree of protection
IP20
Fault signal relay
No
Function
Single direction
Initial voltage during start
40 ... 70 %
Integrated electronic overload
No
Number of starts per hour at 3.5*Ie for 7 sec. 50% ON time 50% OFF time
10
Overload protection
Recommended MS116 4.00 ... 10.00
Overload signal relay
No
Product main type
PSR6
Ramp time
0 ... 20 second [unit of time]1 ... 10 second [unit of time]
Rated control circuit voltage
24 V DC
Rated control supply voltage
24 V AC/DC
Rated operational current - in-line connection
6.8 A
Rated operational power - in-line connection
(230 V) 1.5 kW(400 V) 3 kW(500 V) 4 kW
Rated operational voltage
208 ... 600 V AC
Run signal relay
Yes
Service factor percentage
100.00%
Signal indication completed start ramp
Green
Signal indication ramping up/down
Green
Signal indication ready to start/standby ON
Green
Signal indication running R
Green
Starting capacity at maximum rated current
4xIe for 6s
Step down voltage special ramp
100 ... 60 %
Switch for inside delta connection
No
Tightening torque
Control Circuit 1 N·mMain Circuit 1 N·mSupply Circuit 1 N·m
The softstarter PSR6-600-11 has a rated maximum operational current of 6 A with an operating voltage span from 208...600 V AC. The rated control voltage is 24 V AC/DC. PSR features a two-phase control soft start and stop through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN signal is available from a relay output in NO (normally open state). The start/stop ramp and time is easy to set by three potentiometers on the front. PSR is often used in combination with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are, for example, pumps, fans, compressors, and conveyors.
| Brand | PT Coupling |
| Model | 62393025 |
| Brand | Flexco |
| Model | 40923 |
| Brand | Wiegmann |
| Model | HW-N4X241210CH |
| Brand | Flexco |
| Model | 40108 |
| Brand | Hammond Power Solutions |
| Model | MG3A0225SKSAHC0 |