Image for Illustration purposes only. Actual product may vary
The PAX Lite Process Time Meter, Model PAXLPT, displays a value representing the time between a beginning and end point of a process, such as a conveyor oven.
The PAXLPTs display will update inversely in relation to the input signal frequency. As input frequency increases (representing speed), the PAXLPT time display will decrease indicating a reduction in the duration of process time. For example, the bake time through an oven will decrease the faster the conveyor runs.
The display can be programmed for two operating modes. Operating in the 6 digit mode, the PAXLPT can readout in any whole value, such as seconds, minutes, or hours. This mode also provides capability for decimal points. The 5 digit mode functions as a chronometer, which has a maximum display value of 999-59. This formats the display to allow the meter to readout in hours and minutes, minutes and seconds, etc.
The PAX Lite Process Time Indicator also has a feature called 'moving window average'. This allows one time disturbances, or irregularly spaced items to be averaged over eight inputs, thus keeping display fluctuations to a minimum while still updating the display on every pulse. This feature can be enabled or disabled by a rear DIP switch.
The PAXLPT can accept many different types of sensors including magnetic pickups, logic sensors, and NPN open collector sensors, as well as switch contact closure sensors.
The meter has been specifically designed for harsh industrial environments. With a NEMA 4X/IP65 sealed bezel and extensive testing to meet CE requirements, the meter provides a tough yet reliable application solution.
- Process Time Indicator
- 1/8 DIN (50 mm x 97 mm)
- 6 Digit, 0.56" (14.2 mm) Red LED Display
- Display Modes 999999 or 999-59 Mode
- Input Rates up to 25 KHz
- Accepts a wide variety of Sensors
- Programmable Scaling
- Programmable Decimal Points
- NEMA 4X/IP65 Sealed Front Bezel
|ENC5A000||ENC5A Steel NEMA 4/IP65 Enclosure for PAX|
|ENC5B000||ENC5B NEMA 4X/IP65 Plastic Enclosure for 1 PAX meter|
|ENC5C000||ENC5C NEMA 4X/IP65 Plastic Enclosure for 2 PAX meters|
|TCM10000||TCM1 Triac Converter Module, 115 VAC|
|VCM10000||VCM1 Voltage Converter Module, 450 V AC/DC|
|VCM20000||VCM2 Voltage Converter Module, 50270 V AC/DC|
|BMK40000||BMK4 Base Mount Kit for Apollo, Gemini, PAX, TCU, PCU, TSC, PSC and PXU|
|BMK90000||BMK9 DIN Rail PAX Base Mount Kit|
|PMK4B000||PMK4B Apollo, IM, PAX, TCU, PCU, TSC, PSC and PXU Mounting Panel|
|PMK50000||PMK5 Panel Mount Adapter Kit (1/4 DIN to 1/8 DIN)|
|PMK80000||PMK8 Panel Mount Adapter Kit (Gemini to PAX)|
|SNUB0000||SNUB RC Snubber Inductive Load Supressor|